Home > Live Sound > Power Amplifiers > Power Amplifiers >

Ashly SRA-2150 - Power Amplifier 2x150W @ 4Ohms


Ashly SRA-2150 - Power Amplifier 2x150W @ 4Ohms


 
-------------- Alternate Views: ---------------


List Price: $949.00
PAS DEAL $749.00
You save $200.00!
You'll earn 650 points
Mfg Model SKU SRA-2150
.



Availability: Usually ships in 1 -2 business days

Product Code : SRA-2150
QTY:

DESCRIPTION
 

The Ashly SRA-2150 is a 2-channel convection-cooled rackmount P.A. or studio power amplifier housed in a rugged 1RU metal chassis, offering an output of 80 Watts per side at 8 Ohms, designed to drive 4 and 8 Ohm loads.

The SRA-2150 incorporates a switch-mode-power supply and Class-D amplifier circuitry, providing a power-efficient solution. The low-noise unit features a switchable HPF filter and selectable gain sensitivity, turn-on delay DIP switches with up to 8 seconds of delay available and dual or bridge modes of operation.

The SRA-2150 is equipped with a front-panel headphone monitoring output, an internally switchable 120V/240V power supply, extensive protection circuitry, and standard Euroblock inputs along with screw terminal outputs.

Key Features

  • 1RU 9 lb. lightweight rackmount stereo power amplifier with 80 Watts per side power output at 8 Ohms
  • Selectable Dual or Bridge Mono Operation, designed for 4- or 8-Ohm loads
  • 2-stage high-efficiency switched mode power supply with high power-to-weight ratio
  • Ultra-quiet convection-cooled operation
  • On-board 80Hz HPF, selectable gain sensitivity
  • Up to 8 sec. of turn-on delay with selectable Dip Switch complement
  • Comprehensive amplifier protection circuitry includes: Output Over-current, DC Output, Main Supply Rail Over-voltage, Chassis Temperature, Inrush Limiting, Mains Fuse
  • Front Panel Indicators include: overall power, standby, and protect; per-channel clip and signal indicators
  • Euroblock input connectors, Screw Terminal outputs

Specifications:

Power Rating Stereo @ 8 Ohms: 80W per Ch.
Stereo @ 4 Ohms: 150W per Ch.
Mono Bridge @ 8 Ohms: 300W
Damping Factor >200, 8-Ohm load, <1kHz
Input Sensitivity 1.5V
Input Impedance 20 kOhms, Balanced
Gain Selectable 26dB or 36dB
Frequency Response 20 Hz - 20 kHz, +/-1.0dB
Signal-to-Noise Ratio >105dB, 20Hz - 20kHz unweighted
Total Harmonic Distortion (THD) <0.01% (8-Ohm load, 10dB below rated power, 20Hz - 10kHz
Input Connections 2 x Ch.1,2 3- Pin Euroblock
Output Connectors 2 x Ch.1,2 Screw Terminals
1 x 1/4" Stereo Headphone Jack
Controls Front Panel 1 Power Switch
2 x Gain Control Knobs
Controls (Rear) 4 x Delay DIP Switches
2 x 80Hz HPF On/Off Button
2 x Gain Sensitivity Button
2 x Bridge/Stereo Mode Switch
Indicators 1 x Blue Power On LED
1 x Yellow Standby LED
1 x Red Protect LED
2 x Red Clip LED's
2 x Green Signal LED's
Cooling Convection-cooled
Power Consumption 37.5W (1/8 Power Pink Noise @ 4 Ohm)
Typical Current:
Idle: 0.35A
1/8 Power: 1.10A
Dimensions 19 x 1.75 x 11" (483 x 44.5 x 279.4mm)
Weight 9 lb (4.1 kg)
Specialties Adjustable Turn-On delay Switches
Convection Cooling
Switch-Mode Power Supply

 





Share your knowledge of this product with other customers...Be the first to write a review

Browse for more products in the same category as this item:


Live Sound > Power Amplifiers > Power Amplifiers
Live Sound > Power Amplifiers