Home > Microphones >

Crown PZM11LL Boundary layer microphone with line-level output

Crown PZM11LL Boundary layer microphone with line-level output

List Price: $189.00
PAS DEAL $139.00
You save $50.00!
You'll earn 139 points

Availability: Usually Ships in 24 Hours
Product Code : PZM11LL

div style="text-align: center;">

Crown PZM11LL Boundary layer microphone with line-level output

PZM11LL with line-level output, Crown Microphones

Same as the PZM-11, except that the PZM-11LL features line-level output and is powered by 24VAC, 12-24VDC, or phantom power.

The Crown PZM-11 and PZM-11LL are Pressure Zone Microphone's designed for conference-room applications. They can be mounted in the ceiling or wall in a standard electrical outlet box. Providing excellent intelligibility, the PZM-11 and PZM-11LL are designed to look like something other than a microphone so as not to draw attention. The PZM-11 has a mic-level output and is powered by 12 to 48 volts phantom power.

The PZM-11LL has a line-level output and can be powered by 24V AC, 12-24V DC, or 12-48V phantom power. Since the PZM-11LL has a high output, it can be plugged directly into a VCR line input-no costly mic preamp is needed.

To phantom power the PZM-11LL, a modification will have to be made to the electronics module. A factory modified version for direct phantom power is available as the PZM-11LLS2.

Like other Pressure Zone Microphones, the PZM-11and PZM-11LL utilize the Pressure Recording Process in which a miniature condenser microphone capsule is mounted very close to a sound-reflecting plate or boundary. The capsule is mounted in the "Pressure Zone" just above the boundary, a region where sound coming directly from the sound source combines in-phase with sound reflected off the boundary. The benefits are a wide, smooth frequency response free of phase interference, excellent clarity and "reach," and consistent pickup anywhere around the microphone.

In the PZM-11and PZM-11LL, low frequencies below the voice range are rolled off to reduce pickup of air-conditioning rumble. The highfrequency response is boosted slightly to aid clarity and articulation.

The microphone connector is a row of screw terminals for easy installation. The output is balanced, low impedance, which allows long cable runs without hum pickup or high-frequency loss.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Microphones > Boundary Microphones