Home > Recording > Mic Preamps > Multi-Channel Preamps >

Earthworks 1024 - 4-Channel Zero Distortion Preamp

Earthworks 1024 - 4-Channel Zero Distortion Preamp

List Price: $4,499.00
PAS DEAL $3,599.00
You save $900.00!
You'll earn 3599 points

Availability: Usually Ships in 1 to 2 Business Days
Product Code : 1024

Made in the USA, by an American!
Support American made products
Our future depends on it!!!

Four Channel ultra clean preamp with Zero Distortion Technology

The ZDT preamplifier series is based on all new discrete circuitry designed by David Blackmer, establishing a new standard of sonic excellence in electronics. This exacting new standard provides frequency response from 1Hz to 200kHz +0.5dB, an incredible rise time of 0.27 microseconds and distortion of less than 1 part per million (0.0001%) - eliminating all possibility of sonic degradation. These preamps are so fast, so clean and so transparent that you don't even know they are there. It is like plugging your microphone into a "piece of wire with gain". You will hear clarity and detail with the ZDT preamps that is not available in any other preamp at any price. Check one out for your studio or other applications that demand the highest quality electronics.


  • Zero Distortion - less than one part per million
  • Lowest Noise of any preamp on the market
  • Full Differential (balanced) from XLR in to XLR out � no internal conversion to single-ended
  • All Discrete Components; Class A Amplification (No ICs in the signal path)
  • No Electrolytic Capacitors in the signal path
  • Greater Transparency with minimum signal path and minimum features
  • High output level +33dBu
  • Very Low Output Impedance will drive long lines without interference or signal loss
  • True 48 volt phantom, polarity reverse & clip indicator
  • Separate XLR & 1/4" Phone (t-r-s) outputs, each with its own gain/level controls
  • 1/4" Phone connector output will drive balanced or unbalanced inputs


Frequency response

Impulse response


Enoise (Input)

Translation to EIN*

Input Impedance

Slew rate
DC offset
Power Requirements



2Hz to 100kHz +/- 0.1dB
1Hz to 200kHz +/- 0.5dB
1% settling time - 1.4 usv30 mV/Pa
square wave rise time - 0.27 us
XLR stepped output -
under 1 ppm (0.0001 %)
Variable output - .001 %

1.6nV/Hz1/2 typical spectral
density @ 20 dB gain;
.86nV/Hz1/2 @ 40 dB gain
.6nV/Hz1/2 @ 60 dB gain
-132dBV @ 20 dB gain
-140dBV @ 40 dB gain
-143 dBV @ 60 dB gain
(20Hz to 20kHz A weighted)
Typical current noise spectral
desnity @ input 1.5pA/Hz1/2
100 kOhms (phantom off)
13 kOhms (phantom on)
servo balanced to +/- 1 mV typical
120 VAC (230V unit available)
standard IEC connector (supplied)
Internal 250mA 250V spare
fuse included
1 rack space
1.75" X 19" X 10.375" (~11" overall)
14 lbs. shipping

Click here for more information

Related Products
Earthworks SR30mp Matched Pair of SR30 Microphones
PAS DEAL $1,849.00

Earthworks SR30mp Matched Pair of SR30 Microphones

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Recording > Mic Preamps > Multi-Channel Preamps
Recording Made in the USA
Recording > Mic Preamps