Home > Microphones > Condenser Microphones >

Earthworks M30mp matched pair of M30 measurement microphones

Earthworks M30mp matched pair of M30 measurement microphones


 
List Price: $1,874.00
PAS DEAL $1,499.00
You save $375.00!
You'll earn 1499 points
.


Availability: Usually Ships in 1 to 2 Business Days
Product Code : M30MP
QTY:



The following items are included with this product:

Description
 
Made in the USA, by an American!
Support American made products
Our future depends on it!!!



Earthworks M30 MP matched pair measurement microphones

includes 2 free Whirlwind 20 ft mic cables

MORE INFO-BUY NOW-CLICK HERE


9Hz to 30kHz +1/-3dB

Matched pair of M30s (mic clips, case and ADP1 adapter included)

The M30 is an affordable reliable 30kHz reference microphone. It utilizes a very small, very accurate omnidirectional element, a carefully crafted stainless steel body and innovative circuitry to deliver flat time coherent response from 9Hz to 30kHz.

The M30 has become the defacto standard reference for Smaart, MLSSA, SIMM and TEF. The M30 is the most cost effective measurement mic which you can trust. It exceeds the specified requirements for all audio band measurement systems. The M30 is a standard.

The M30 comes with a measured frequency response chart which includes a value for sensitivity. Since the M30 is stable with respect to temperature, you can input this number if your program allows and be very close to correct absolute SPL. We also ship the M30 with a 'white' calibrator adapter which adapts from the M30 to a 1/2 inch calibrator adapter for field calibration.

Specifications

  • Frequency response: +-1dB 9Hz to 27kHz, +1/-3dB 5Hz to 30kHz
  • Polar Pattern: Omnidirectional
  • Sensitivity: 8mV/Pa (-42 dBV/Pa)
  • Power requirements: 48V phantom, 10mA
  • Max acoustic input: 150dB SPL
  • Peak output voltage: 10V
  • Output: XLR intended to drive a balanced transformerless input (pin 2+)
  • Min output load: 600ohms between pin2 and 3
  • Noise: 27dB SPL equivalent (A weighted)
  • Dimensions (LxD): 229mm x 22mm (9 x .860 inches)
  • Influence of magnetic field: 80A/M induces less than 52dB SPL equivalent

Click here for more information


Related Products
K&M 21021 Black Floor Stand - Extra tall black tripod Earthworks ADP1 - 1/2" calibrator adapter for all M Series Earthworks 1024 - 4-Channel Zero Distortion Preamp Earthworks 1022 - 2-Channel Zero Distortion Preamp
PAS DEAL $127.00

Add
PAS DEAL $35.00

Add
PAS DEAL $3,599.00

Add
PAS DEAL $2,199.00

Add
K&M 21021 Black Floor Stand - Extra tall black tripod Earthworks ADP1 - 1/2" calibrator adapter for all M Series Earthworks 1024 - 4-Channel Zero Distortion Preamp Earthworks 1022 - 2-Channel Zero Distortion Preamp


Share your knowledge of this product with other customers... Be the first to write a review



Browse for more products in the same category as this item:


Microphones > Condenser Microphones
Microphones Made in the USA
Microphones