Home >

Electro-Voice DC-ONE-NA, 120V, 2-IN-6 Digital Speaker Controller

Electro-Voice DC-ONE-NA, 120V, 2-IN-6 Digital Speaker Controller

PAS DEAL $1,020.00
You'll earn 1020 points
Mfg Model : F.01U.149.138
UPC: 701001051984

Availability: Usually Ships in 3 to 5 Business Days
Product Code : DC-ONE-NA

DC ONE   2 in / 6 out speaker controller, Electro Voice


Two-In-Six-Out Loudspeaker Processor

Based on a two-in, six-out topology, the DC-One is designed primarily for users of small-to-medium sized sound systems in both mobile and installed applications. While the unit is an all-new development based on a powerful SHARC processor, it is 100 percent compatible with all settings from other Electro-Voice signal processors, including the Dx38�the best choice for achieving maximum performance with an EV loudspeaker system. 

A large part of DC-One�s development was aimed at ensuring that users can easily handle its serious digital horsepower and high-end audio performance. Though free PC-Editor software is available, the DC-One can be easily operated via the front panel. Direct access buttons, six predefined configuration modes (one being free configuration), straightforward output delay settings, and true professional metering all allow for safe operation. 

DC-One's unique "front-panel access control" allows the user to select a personal library of accessible presets (out of 60 factory and 20 user presets). In addition, the user can determine which individual parameters in each preset are locked (e.g. factory predefined output parameters) or editable (e.g. master EQ or delay settings). 

The DC-One has a 19-inch chassis that is deep enough to match typical amplifier depths, a front panel USB connector for the PC-Editor, and accepts either analogue or digital (AES-EBU) input signals; a six-dB input pad is available. The RS232 on the rear also provides eight contact closures for preset changes, or allows two units to be linked for larger systems. The PC-Editor software, as well as firmware updates allowing additional functions, will be available on www.electrovoice.com


Analog Inputs 2 XLR (Electronically Balanced), 2 XLR THRU OUT (Electronically Balanced)
Digital Inputs 1 XLR AES/EBU (2 Ch.)
Analog Outputs 6 XLR (Electronically Balanced)
Nominal Input Voltage 1.23V / +4dBu
Maximum Input Voltage 8.7V / +21dBu (Without -6dB Analog Pad Engaged)
Nominal Output Voltage 1.23V / +4dBu
Maximum Output Voltage 8.7V / +21dBu
Input Impedance (balanced) 10 kΩ
Output Impedance (balanced) 50 Ohms
A/D Conversion 24-Bit Delta-Sigma
D/A Conversion 24-Bit Delta-Sigma
Sample Rate 48 kHz
Data Format 24-Bit
Internal Processing 32-Bit Floating Point
Frequency Response 10 Hz - 22 kHz (+/- 0.5 dB)
Dynamic Range 111 dB (unweighted, band limited 22 Hz - 22 kHz)
THD+N < 0.01% (band limited 22 Hz - 22 kHz)
Control Protocol Front Panel USB Connector
Mains Voltage 100-240 VAC
Power Consumption 25W
Electronics Type Processor
Weight Net4.6 kg ( 10.14 lbs )
Dimensions (HxWxD)44.45 x 482.6 x 355.6 mm
(1.75" x 19" x 14")

Related Products

DC-One Editor Software
DC-One Editor Software gives you the option of getting deeper into system control with an intuitive user interface. Functionally, DC-One Editor Software utilizes graphics and color schemes that are stylistically inspired by popular recording software applications. A picture is worth a thousand words � rather than editing your sound with text and numbers, the graphic interface allows you to immediately visualize and control parameters and settings, live and in real-time.DC-One Editor Software allows you to take the control and configuration of your system to the next level. Operating on a Windows PC, the DC-One Editor connects to the hardware via a simple, plug-and-play, USB interface.All changes and edits happen in real-time, allowing you to immediately hear the results of any adjustment. All parameters of the system, including VU meters, mute switches, level controls, and DSP functions are instantly visible, providing an in-depth overview of your systems� operation.DC-One Editor offers maximum flexibility. All changes can be stored in project files on your PC. Presets can be stored in the DC-One hardware or software, and can be recalled at any time.Whether you have multiple loudspeaker systems to manage or simply want to store different EQ settings for the different venues in which you work, DC-One Editor Software provides all the tools and flexibility you need to make your sound better and your gig easier.Minimum System RequirementsPC with Pentium IV 1.2 gHz or equivalent processor (1.6 gHz or better is recommended) Microsoft Windows XP Service Pack 2 or VistaMicrosoft .Net 2.0 Framework256 MB RAMHard disk with 250 MB of storage available VGA Monitor (1024x768) Graphics card, High Color (16-bit) Mouse Keyboard One USB port   

Related Products
DBX ZC-6 Push-Button Up/Down Volume Controller DBX 1074 - 4-Channel Noise Gate DBX 260 DriveRack 2x6 Loudspeaker Management System
PAS DEAL $54.00

PAS DEAL $529.95

PAS DEAL $599.95

dbx ZC-6 Push-Button Up/Down Volume Controller dbx 1074 - 4-Channel Noise Gate dbx 260 DriveRack 2x6 Loudspeaker Management System

Share your knowledge of this product with other customers... Be the first to write a review