Home > Microphones > Condenser Microphones >

BH-2 The Black Hole SE, JZ Microphones

JZ Microphones BH-2 The Black Hole SE

-------------- Alternate Views: ---------------

List Price: $1,179.00
PAS DEAL $999.00
You save $180.00!
You'll earn 999 points

Availability: Usually Ships in 1 to 2 Business Days
Product Code : BH-2


As microphone Black Hole during last months has been successfully passing tests by professionals and having great references from many users, JZ decided to launch Black Hole SE (BH-2).

The Black Hole SE is cardioid condenser microphone with one large, true electrostatic capsule inside the compact head made by new golden drops technology. The new special capsule has single, less centre tap diaphragm and patterned variable sputtering, using specially mixed alloy for coating. The BH-2 is in the same quality and has the same design as Black Hole, only it is less expensive. It has also a new generation integrated shockmounting and five year warranty.

The characteristics of Black Hole SE:

1. Cardioid condenser microphone.

2. Class A discrete amplifier circuit.

3. One large, true electrostatic capsule inside the compact head.

4. New special capsule with single, less centre tap diaphragm and adjustable backplate.

5. Patterned variable sputtering of diaphragm, using specially mixed alloy for coating.

6. Integrated capsule shockmount.


Transducer type


Operating principal

pressure gradient

Diaphragms active diameter

27 mm

Frequency range

20 Hz to 20 kHz

Polar pattern


Output impedance

50 ohms

Rated load impedance

100 ohms

Suggested load impedance

>250 ohms

Sensitivity at 1000 Hz into 1000 ohms load

21 mV/Pa

S/N Ratio CCIR 468-3 weighted

76,5 dB

S/N Ratio DIN/IEC 651 A-weighted

87,5 db-A

Equivalent noise level DIN/IEC A-weighted

6,5 dB-A

Maximum SPL for 0.5% THD at 1000 ohm load

134,5 dB

Dynamic range of the microphone preamplifier

128 db

Phantom powering voltage on pins 2 & 3 of XLR

+48 V (+/-4 V)

Current consumption

<1,5 mA

Output connector

3-pin XLR male, gold plated contacts

Signal polarity

positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3


203 x 51 x 28

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Microphones > Condenser Microphones