Lab Gruppen E12:2 2-Channel Power Amplifier
New technology and Energy Star™*
In designing the new E Series, Lab.gruppen engineers drew upon the cutting-edge amplifier design philosophies developed for the flagship PLM™ 20000Q Powered Loudspeaker Management system, evolving these to create new circuit topologies and control features to meet the demands of 21st century AV installations. The result is a new amplifier platform called IDEEA: IntelliDrive Energy Efficient Amplifier. The principal design challenge was maintaining Lab.gruppen’s impeccable sonic performance and robust power output while meeting – or exceeding – the rigorous efficiency requirements of Energy Star* certification. The challenge was met on two fronts: reducing current draw during operating cycles with vigorous program material and high output levels, and reducing power consumption during non-operational cycles.
New power supply and output stage
For peak operating efficiency, the E Series incorporates a new high-headroom universal power supply accepting any mains voltage from 70 to 265 V at 50 or 60 Hz. A higher storage capacity in the power supply prevents excessive draw on the mains inlet during repeated peak bursts, maintaining extra headroom on the supply rails for sustained maximum output with minimal distortion. The Class D output stage is highly efficient (above 90%), while the inherently bridged topology allows up to twice the rated power output on one channel when the other channel is unused or driving a low power application. RSL™: Mix, match and balance loads The new Rail Sensing Limiter (RSL) is the latest refinement of Lab.gruppen’s proprietary approach to optimizing amplifier output characteristics to match the connected load. Each channel has a two-position switch that sets the output for driving either low impedance or high impedance (70 V) loudspeaker systems, with a +4 dBu sensitivity regardless of load type. RSL works in conjunction with the high headroom power supply and inherently bridged output stage to allow asymmetric loading. Power resources in the amplifier can be utilized to maximum advantage, with one channel producing far beyond its rated output when the other channel has lesser power requirements.
Flexible mode power control
To conform with Energy Star requirements, E Series amplifiers offer auto-power-down, which activates when no signal is detected for 20 minutes. Auto-power-on is triggered when signal is again present at the input. The GPI-type contact closure can also be used to control the power state as well as external power sequencers if desired.
E Series amplifiers are designed for ease of installation and reliable service, with notable features including a 50 Hz high-pass filter (switchable per channel), inputs and outputs on detachable Phoenix-type screw terminals, and a temperature controlled fan that turns off for low-level signals. Comprehensive circuit protection and fault indication also included.
*ENERGY STAR is the trusted, government-backed symbol for energy efficiency helping us all save money and protect the environment through energy-efficient products and practices. The ENERGY STAR label was established to make it easy for consumers to identify and purchase energy-efficient products that offer savings on energy bills without sacrificing performance, features, and comfort. As technology evolves, the qualification for the standard becomes ever more stringent. E Series meets all the requirements for the latest iteration, Energy Star 3.0.
- High power density – Up to 2 × 600 W in 1U
- Certified Energy Star* compliant
- Flexible – IntelliDrive delivers similar power per channel at 70 V, 2, 4, 8 and 16 ohms
- Asymmetric loading allows “mixing and matching” of loads with different impedances to maximize both overall system efficiency and inventory utilization
- Patented IDEEA output stage based on Class D topology
- High efficiency – Extremely low power consumption and heat output
- Exceptionally low cost of ownership over lifetime
- RSL switch circuit senses rail voltage and optimizes output for instantaneous load conditions
- Efficient cooling – One temperature-controlled fan
- Comprehensive circuit protection and fault indication