Home > Recording > Studio Monitor Speakers > Active Studio Monitors >

Mackie CR4BT Powered Studio Monitor with Bluetooth (Pair)

Mackie CR4BT Powered Studio Monitor with Bluetooth (Pair)


 
-------------- Alternate Views: ---------------


PAS Deal: $199.99
You'll earn 200 points
.


Availability: Usually ships in 1 or 2 business days
Product Code : MACKIE-CR4BT
QTY:

Description
 

Mackie CR4BT Powered Studio Monitor with Bluetooth (Pair)

Compact and portable at 12 lb, this pair of 50W CR4BT Multimedia Monitors from Mackie provides audio playback in home and studio environments. As such, they are useful for mixing music or post-production sound, and they boast Bluetooth capability to boot.

The pair consists of one Class AB amplifier-powered monitor and a passive un-powered monitor that you can connect with an included stereo cable. For the low-end, these speakers utilize 4" polypropylene-coated woofers and a rear port tube, while the highs are handled by 0.75" silk dome tweeters; all of this ensures a frequency response of 70 to 20,000 Hz with a maximum SPL of 100 dB.

A switch allows you to select whether the powered speaker will function as the left or right monitor. This is particularly helpful when you must position the speakers near power outlets, or when you have to decide whether you'd rather have your front-panel volume knob situated on your left or right. Also adorning the monitor's front are an LED (indicating whether or not your monitors are on at any given time) and a dedicated headphone output (for private listening; please note that plugging your headphones in will silence the monitors themselves).

You can connect mobile devices and other devices directly to the monitors via 1/8", 1/4" or RCA inputs—but then again, feel free to skip all that and just go with Bluetooth. The monitors also come with isolation pads for reducing the transmission of structural vibrations.

  • 50W peak, 28W RMS
  • RCA, 1/8", and 1/4" TRS balanced and unbalanced inputs
  • Supports Bluetooth and stereo headphones
  • Lightweight at 12 lb
  • Switchable L/R configuration for convenience
  • On-board volume knob
  • Wood cabinet
  • Multiple necessary cables included
  • Acoustic isolation pads included


Frequency Response70 Hz to 20 kHz at -3 dB
60 Hz to 20 kHz at -10 dB
Maximum SPL100 dB
Crossover Frequency3 kHz
Low Frequency Transducer4.0" / 102 mm polypropylene-coated woofer
High Frequency Transducer0.75" / 19 mm silk dome tweeter
Amplifier (Power)28 W RMS / 50 W Peak
ClassAB
Input TypeBalanced / unbalanced 1/4" TRS, unbalanced RCA (Rear), 1/8" TRS (Front)
Input Impedance20 kOhms balanced bridging
10 kOhms unbalanced
Output Type1/8" stereo headphones (front)
BluetoothBluetooth Protocol: 3.0
Bluetooth Function: Audio streaming
EnclosureSolid MDF
FinishBlack vinyl wrap
Port ConfigurationCustom-tuned rear port tube
DampingAdiabatic batting
Operating Temperature32 to 104°F / 0 to 40°C
Power RequirementsUnited States: 120 VAC, 60 Hz
Power Consumption72 W with music, loud mix
Dimensions ( H x D x W)8.8 x 6.1 x 7.3" / 224 x 155 x 185 mm
Weight12 lb / 5.4 (pair)



Share your knowledge of this product with other customers... Be the first to write a review



Browse for more products in the same category as this item:


Recording > Studio Monitor Speakers > Active Studio Monitors
Recording > Studio Monitor Speakers
Recording