Home > Recording > Mic Preamps > Single-Channel Preamps >

Martinsound MSS-10 Microphone Preamplifier

Martinsound MSS-10 Microphone Preamplifier

-------------- Alternate Views: ---------------

List Price: $1,995.00
PAS DEAL $1,899.00
You save $96.00!
You'll earn 1899 points

Product Code : MARTINSOUND-MSS10


Martinsound MSS-10 Microphone Preamplifier

The movers and shakers of professional audio dream about finding that rare piece of equipment that will keep them on the cutting edge. A career building tool that will effortlessly deliver awesome sound. MSS-10, The Natural Mic Preamp is audio magic in a box. It sounds like the mythical straight wire with gain.

The MSS-10 is comprised of dual signal paths in a single unit, allowing flexibility in getting the best audio from a microphone to a recorder. The preamp section uses two stages of gainfrom mic input to direct out, providing wide bandwidth and a stable design. It features 65dB of gain switched in 5dB steps, 48V phantom, a 20dB pad and phase reverse. The line driver section can select the preamp out or a balanced line input. This makes a great EQ insert point. The level control adjusts continuously from infinity to +10dB, allowing for riding of gain. The addition of a mute and professional VU meter allows the finest audio quality possible to be sent directly to the recorder. Engaging the Cal button provides precise VU monitoring of the selected source. Not only does it sound awesome, it looks like a piece of art. The sophisticated, elegant appearance of the matte finish, nickel-plated faceplate matches your finest microphones while ergonomic knobs and lighted push buttons provide positional information at a glance from any angle.

Microphone Preamplifier Section:
• Gain 20dB-65dB
• Maximum Input +22.5 dBu (@ 1kHz, THD <= 0.003%, 20 dB Pad In)
• Maximum Output +24 dBu
• Input Impedance 2,450 Ohms (@ 1kHz)
• Output Impedance 50 Ohms
• Frequency Response 10Hz - 20kHz (+0.5/-0.0)
• EIN -126.5 dBu Typ. (10Hz-20kHz, 150 Ohm Source)
• THD+N <=0.0015% (20dB Gain @ 1kHz, +4dBu Out, 10Hz-20kHz Bandwidth)
• CMRR 65dB Gain 60Hz <=108dB 1kHz <=85dB 10kHz <=65dB

Line driver section:
• Gain 10dB
• Maximum Input +24 dBu
• Maximum Output +24 dBu
• Input Impedance 20k Ohms (Balanced)
• Output Impedance 50 Ohms
• Frequency Response 10Hz - 200kHz (+0.0/-0.25)
• THD+N <=0.001% (0dB Gain @ 1kHz, +4dBu Out, 10Hz-20kHz Bandwidth)

Power supply:
• Power Rails +24V
• Phantom +48V
• Power Consumption 10 Watts
• Power Requirements 100-120, 220-240 VAC

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Recording > Mic Preamps > Single-Channel Preamps
Recording > Mic Preamps