Home > Accessories > Cables, Connectors, and Adaptors > Adaptors & Connectors >

Neutrik NL4FC Standard Speakon NL4 cable mount Female Connector

Neutrik NL4FC  Standard Speakon NL4 cable mount  Female Connector


 
List Price: $7.89
PAS DEAL $5.98
You save $1.91!
You'll earn 6 points
.


Availability: YES, in stock
Product Code : NL4FC
QTY:

Description
 

Neutrik NL4FC Standard Speakon NL4 cable mount Female Connector


NL4FC - Standard Speakon NL4 cable mount Female Connector

NL4FC
4 pole cable connector with latch lock. Cable sleeve for cables 5 - 15 mm diameter. 30 A continuous per contact.

Note: The NL4FC cord end will not insert into NL2MP panel jacks. If your equipment is equipped with NL2 panel jacks, then NL2 connectors must be used.

Key Features:

  • Rugged Genuine Neutrik construction
  • Suitable for 11 ga. x 4 conductor SJ cable or smaller gauge
  • Compatible with NL4 panel jacks
  • Posidrive Screwdriver head set-screws
  • Easy grip release button

Applications:

  • Bi-amp or full range speaker cable connections

Specifications:

  • Manufacture: Neutrik
  • Model: NL4FC
  • Type: Speakon NL4 cord end
  • Color: Blue & Black
  • Weight: 0.10 lbs ea.
  • Warranty: 3 years covering mfg. defects
  • Price: $4.50 ea. plus shipping

Technical Description:

TECHNICAL DATA

Electrical

  • Rated current/contact: 30 A rms continous, 40 A rms 1min.
  • Dielectric strength: 4kV peak
  • Rated voltage: 250 V ac
  • Contact resistance: = 3 mΩ after 5000 insertion-withdrawal operations
  • Insulation resistance - initial: > 2 GΩ - after damp heat test: > 1 GΩ
  • Inrush/outrush current capability (12 V source): 300/30A/200ms
  • Creepage distance: according to IEC 664-1

Mechanical

  • Lifetime: >5000 mating cycles
  • Retention method: Quicklock with latch
  • Cable anchoring: NEUTRIK® chuck principle
  • Cable O.D. range: 5 - 15 mm
  • Cable retention force: = 220 N Subject to cable die and material
  • Wiring: screw-type terminals or soldering, 12 AWG stranded/solid
  • Solderability complies with IEC 68-2-20

Materials

  • Contacts: Female: CuZn39Pb3
  • Securing element: ZnAI4Cu1, CuNi plated
  • Housing: PA 6 30% GR
  • Insert (FC part): PBTP 20% GR
  • Bushing: PA 6 15% GR
  • Chuck: POM
  • Temperature range: -30°C to +80°C
  • Flammability: UL94V-0 (housing), UL94HB

WIRING
Amplifier

  • Stereo ("HIFI"): one NL4MP socket left channel pins 1+/1- right channel pins 2+/2-
  • Power ("PA) Standard: three NL4MP sockets "A" socket: left channel pins 1+/1- "B" socket: right channel pins 1+/1-
  • Bridged mono: "M" socket: left channel pins 1+/1- right channel pins 2+/2-
  • BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins 2+/2-

Cable

  • Stereo ("HIFI"): NL4FC on amplifier end, four conductor cable splits into two pairs with NL4FC on each end
  • Power ("PA) Standard: a two-conductor cable for each channel with NL4FC on both ends
  • Bridged mono: a special two-conductor cable, on both ends wired to pin 1+/2+ of NL4FC
  • BI-Amp: a four-conductor cable on both ends wired to pins 1+/1-, 2+/2- of NL4FC

Speaker

  • Stereo ("HIFI"): one NL4MP per speaker left speaker pins 1+/1- right speaker pins 2+/2-
  • Power ("PA) Standard: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-"
  • Bridged mono: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-"
  • BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins 2+/2-


Share your knowledge of this product with other customers... Be the first to write a review



Browse for more products in the same category as this item:


Accessories > Cables, Connectors, and Adaptors > Adaptors & Connectors
Accessories > Cables, Connectors, and Adaptors
Accessories