Home > Recording > Acoustic Treatments > Absorption Panels >

Surface Impaler Broadway Wall Mounting Clip (24 pcs/box), Primacoustic

Primacoustic Impaler Broadway Wall Mounting Clip (24 pcs/box)

PAS DEAL $39.99
You'll earn 40 points

Availability: YES, in stock
Product Code : F101-1000-00

Surface Impaler Broadway Wall Mounting Clip (24 pcs/box), Primacoustic

Broadway™ Mounting Options

  • Simple mounting system anyone can do!
  • Perfect for all types of installations
  • Easy to relocate without marring the walls
  • Choice of wall, corner, and offset impalers

Broadway panels may be mounted in various methods to suit your specific application. In addition to using typical screws and adhesives Primacoustic has developed a series of impalers to provide the installer with a simple, quick and effective method of mounting Broadway acoustic panels onto walls without causing serious surface defacement.

Each impaler features a series of sharp protruding darts that penetrate the panel to secure it in place. To ensure panels do not get dislodged after installation, applying a dab of construction adhesive to the impaler during the mounting process adds another level of security and reduces opportunity for tampering. Impalers are installed using typical sheet rock anchors and screws.

Alternate installations that can be considered include direct screw down using a long screw and retaining washer. This is typically done using a standard screw and a wide faced washer to hold the panel in place. This is a good option in industrial installations where panels may find themselves in harms way or need to be secured on ceilings. Velcro is also a possible option where light duty installations are needed. Finally, for permanent installations, construction adhesive is used by applying a generous bead around the circumference and then crossing from corner to corner. Use a surface impaler to anchor the panel while the adhesive cures.

Whatever your choice, Broadway panels are sure to provide a great looking and effective installation!

Surface Mounting

Primacoustic surface mount impalers are designed to mount Broadway fiberglass acoustic panels directly onto the wall surface. This is the most popular mounting system and is ideal for studio and home-theatre. For commercial installations, adding a dab of construction adhesive on the impaler surface will add a measure of security. Best of all, unlike spray-on installations, using impalers will not cause serious wall surface defacement.

Wall Mounting:

Place top edge on set line. Carefully swing bottom edge to meet Impaler heads. With the panel resting on the Impaler darts, apply in towards wall and downward pressure. Surface Impalers should be located approximately 4" (10.16cm) or more from the panel edges.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Recording > Acoustic Treatments > Absorption Panels
Recording > Acoustic Treatments