Home > Live Sound > Live Sound Speakers > Ceiling / In-Wall / Surface Mount Speakers >

QSC AD-C42T-WH, AcousticDesign Ceiling Speaker (Single)

QSC AD-C42T-WH, AcousticDesign Ceiling Speaker (Single)


 
List Price: $140.00
PAS DEAL $140.00
You'll earn 140 points
.
(Minimum order):  2


Availability: Usually Ships in 1 to 2 Business Days
Product Code : AD-C42T-WH
QTY:

Description Specifications
 

AD-C42T-WH, AcousticDesign Ceiling Speaker (Pair), QSC

The AcousticDesign Series of installation loudspeaker products from QSC Audio expands with the new AD-C42T ceiling mount loudspeaker system. Designed for background and general purpose audio playback, the new AD-C42T is compact and acoustically matched to the entire AD Series. Rated for 40 watts continuous power handling and able to take up to 160 watt peaks, the compact AD-C42T is suitable for a wide variety of ceiling installations

The 4" woofer is equipped with a polypropylene cone for protection in humid environments. The driver features a synthetic rubber surround and in its sealed enclosure is optimized to deliver useable low-frequency extension below 70 Hz. The high frequency device is a co-axial, post mounted 0.75" dome tweeter with a titanium diaphragm and a cloth surround. The coaxial post is mounted slightly off center in relation to the low-frequency driver in order to lessen the destructive interference often found with axisymmetric post mounted coaxial systems. The conical dispersion of the AD-C42T is 100° and sensitivity measures 88 dB SPL.

The baffle and mounting tabs are molded from high-impact polystyrene. The rear enclosure is a heavy gauge, powder coated steel. The attractive aluminum grille is backed with an acoustically transparent white cloth. On the rear of the enclosure is an input cup that features a conduit attachment point plus an additional knockout for daisy-chain wiring. Input signal connection is made with a high temperature resistant ceramic screw terminal for compliance with European safety standards.

The AD-C42T is factory shipped with C-rings and tile rails for installation. New construction rings (AD-NC4) and mud rings (AD-MR4) are also available separately. The AD-C42T is equipped with a 70/100 V transformer with multiple taps and an 8 ohm bypass.

FEATURES
  • 4" polypropylene cone woofer
  • 0.75" titanium dome tweeter
  • 40 watt continuous power handling, 160 watt peak
  • 70/100 V multitap transformer with 8 ohm bypass
  • C-ring and tile rails included


Package Includes:


2 qty. AD-C42T loudspeakers
2 qty. C-ring and tile rails
2 qty. Round grilles (white, paintable)

2 qty. Paint masks
2 qty Connector assemblies


Share your knowledge of this product with other customers... Be the first to write a review



Browse for more products in the same category as this item:


Live Sound > Live Sound Speakers > Ceiling / In-Wall / Surface Mount Speakers
Live Sound > Live Sound Speakers