Home > Live Sound > Amplifiers > QSC Amplifiers >

QSC PLD4.5-NA - 4-Channel Amplifier, 1200w/ch at 8Ohms

QSC PLD4.5-NA - 4-Channel Amplifier, 1200w/ch at 8Ohms


 
-------------- Alternate Views: ---------------


List Price: $2,399.99
PAS Deal: $1,999.99
You save $400.00!
You'll earn 2000 points
.


Availability: Usually Ships in 1 to 2 Business Days
Product Code : PLD4.5-NA
QTY:

Description
 

QSC PLD4.5-NA - 4-Channel Amplifier, 1200w/ch at 8Ohms

Features

  • Flexible Amplifier Summing Technology™ (FAST) drives most any loudspeaker system or configuration by distributing total amplifier power across one, two, three, or all four channels.
  • Four channels of full function onboard loudspeaker DSP with crossover and parametric EQ filters, limiting and alignment delay eliminate the need for outboard loudspeaker processors.
  • Powerful Intrinsic Correction™ processing maximizes the sonic performance of QSC loudspeakers.
  • 20 factory preset configurations that can be modified and stored in the 50 user presets.
  • PowerLight universal switch mode power supply with PFC for highest efficiency, improved audio performance, and low weight.
  • Four input XLR connectors and six NL4 output connectors.
  • Integrated front panel with channel Select and Mute buttons, input and output LED metering, 400×240 LCD, intuitive navigation buttons, LED power button and indicator, and cast aluminum handles.
  • Preset Wizard simplifies amplifier configuration, providing selection from a list of the top selling passive loudspeakers.
PLD4.2PLD4.3PLD4.5
4 Channels1


Dynamic
500 W
700 W
625 W
Continuous
400 W
400 W
350 W
Dynamic
900 W
1400 W
1200 W
Continuous
625 W
625 W
625 W
Dynamic
1200 W
2000 W
1600 W
Continuous
1150 W
1250 W
625 W
2 Channels1


Dynamic
1200 W
1500 W
1500 W
Continuous
800 W
800 W
650 W
Dynamic
2400 W
2000 W
2500 W
Continuous
1250 W
1250 W
1250 W
Dynamic
4000 W
2400 W
4000 W
Continuous
2250 W
2250 W
2100 W
1 Channel1



Dynamic
1600 W
2500 W
1700 W
2500 W
Continuous
1500 W
1600 W
1600 W
1600 W
Dynamic
3500 W
5000 W
3500 W
5000 W
Continuous
2500 W
2500 W
2500 W
2500 W
Dynamic
4500 W
7500 W
4500 W
7500 W
Continuous
4200 W
4200 W
4200 W
3700 W
Typical Distortion


0.01–0.03%
0.03–0.06%
Maximum Distortion 4Ω–8Ω1.0%
Frequency response (8Ω)20 Hz–15 kHz ±0.2 dB
20 Hz–20 kHz +0.2/-0.7 dB
Noise
Unweighted Output Unmuted Weighted Output Muted

-101 dB
-109 dB

Gain (1.2V setting)34.0 dB38.4 dB38.4 dB
Damping factor>150
Input impedance>10 kΩ, balanced or unbalanced
Maximum rms input level
(3.9V setting)
(1.2V setting)

12.28 V (+24 dBu)
3.88 V (+14 dBu)

Controls and indicators (front)Power  • Channel MUTE Buttons • Channel SELECT buttons • Channel input signal and CLIP LED indicators • Channel output and LIMIT LED meters • HOME, ENTER, EXIT, GAIN navigation buttons • Control knob
Controls and indicators (rear)AC Power Disconnect

Input connectorsFemale XLR
Output connectorsNL4
Amplifier and load protectionShort circuit, open circuit, thermal, RF protection. on/off muting, DC fault shutdown, active inrush limiting, input current limiting
AC Power Input4.2: Universal Power Supply 100-132/200–240 VAC, 50–60 Hz
4.3/4.5: Universal Power Supply 100–240 VAC, 50–60 Hz
Dimensions (HWD) inches3.5 x 19 x 123.5 x 19 x 163.5 x 19 x 16
Dimensions (HWD) mm89 × 482 × 30589 × 482 × 40689 × 482 × 406
Weight, Net / Shipping18.5 lb (8.4 kg) / 22 lb (10.0 kg)21.0 lb (9.5 kg) / 25 lb (11.3 kg)22.0 lb (10.0 kg) / 26 lb (11.8 kg)
Agency approvalsUL, CE, RoHS/WEEE compliant, FCC Class A (conducted and radiated emissions)
Carton contentsLocking IEC cable, Quick Start Guide, USB cable

1. 1.0 kHz sine wave, 1% THD, all channels driven

All specifications are subject to change without notice.



Share your knowledge of this product with other customers... Be the first to write a review



Browse for more products in the same category as this item:


Live Sound > Amplifiers > QSC Amplifiers
Live Sound > Amplifiers