| Made in the USA, by an American!|
Support American made products
Our future depends on it!!!
The CP 64S is a versatile commercial preamplifier designed for use
in restaurants, bars, health clubs and offices. The CP 64S is capable
of serving two independent Zones. Two gated Paging inputs and four
Program inputs are provided. Ports are provided for expansion of Page,
Program or Zone signals. Four levels of priority are supported:
- Priority Page
- Non-Priority Page
- Priority Program
- Non-Priority Program
The versatility of the CP 64S allows a wide variety of system configurations while providing simple and intuitive controls.
Two gated Paging Inputs capable of receiving mic or line level input
are provided. Each features independent Mic/Line Pad, Gain Trim,
detector Threshold, Zone Assign and Zone Level controls. Internally
selectable phantom power is provided for each input. Each Paging input
may be summed Pre- or Post- Zone Level control to allow setting Paging
Level independent of Zone Level. An internal Paging Priority switch
allows a master pager to override non-priority paging in its assigned
zones, while allowing true dual zone independent paging. If no Paging
Priority is selected, the Paging inputs mix together for applications
Four stereo Program inputs are provided with
independent Input Level controls. Any one of the four Program inputs
may be independently assigned in each Zone. One of the Program inputs
is a gated Priority Program input. When signal is detected at its
input, it overrides any non-priority Program selection in the assigned
Zones. The Priority detector features internal, adjustable Threshold
and Release-Time controls.
The CP 64S has two Zone outputs: Zone 1 is stereo: Zone 2 is mono. Each Zone features independent:
- Program Select
- Ducker On/Off
- Ducker Depth
- 7 Band EQ (12 dB)
Versatile wired remote control interface ports are provided for Paging
assignment, Zone Level and Zone Program source selection. Paging Zone
and Source/Volume remote controls are available as accessories.
Many options allow the installer to determine exactly which controls
are employee accessible. The SCP 2S is an optional security cover for
the CP 64S's front panel EQ section. Any or all other front panel knobs
can be removed and replaced with hole plugs -- six are included with
the SCP 2S. Front panel Ducker Depth controls are screw driver adjust.
The remote controls allow blank Decora plates to be remote control
security covers. The remote knobs can also be individually replaced
with hole plugs.
The CP 64S improves upon the CP 64 with a universal voltage internal power supply. All other features are identical. See the CP 52S if you only need one page input and one main zone. See the DA 26S if you need up to 6 zones.
Click here for more information