Home > Microphones > Microphone Accessories >

Schoeps AF1 Flanged Mounting Adapter with internal shock mount

Schoeps AF1 Flanged mounting adapter with internal shock mount

-------------- Alternate Views: ---------------

List Price: $216.00
PAS DEAL $216.00
You'll earn 216 points

Availability: Usually Ships in 1 to 2 Business Days
Product Code : AF1

  • provides elastic suspension for microphone holders, e.g. goosenecks
  • for mounting in surfaces
This convenient elastic suspension device accepts any microphone or accessory (such as a gooseneck) with a 20 mm diameter. A clamping arrangement holds the item in place.

For use with our accessories, a mounting cylinder
(ST 20-3/8) with 20 mm outer diameter and a stud with 3/8" threading is available. It has a hole drilled in the center of its top which could be used to pass a miniature cable through. To avoid the need for unsoldering and resoldering the cable connector, however, two notches are also provided on the sides of the adapter.
(Exception: the connector used at the amplifier end of Colette Active Extension Tubes RC KC won't fit through the 20 mm opening).

The ST 20-3/8 mounting cylinder must be ordered separately.

Important: Longer goosenecks or other extensions longer than 30cm need to be mounted with two AF1 according to the drawing below.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Microphones > Microphone Accessories
Microphones > Microphone Accessories > Shock Mounts
Microphones > Schoeps Microphones