Home > Microphones > Condenser and Tube Microphones >

Schoeps CMC641C Set Modular Microphone Set

Schoeps CMC641C Set Modular Microphone Set


 
-------------- Alternate Views: ---------------
List Price: $2,162.00
PAS DEAL $2,162.00
You'll earn 2162 points
.



Availability: Usually Ships in 1 to 2 Business Days

Product Code : CMC641C-SET
QTY:

DESCRIPTION SPECIFICATIONS
 

Schoeps CMC641C Modular Microphone Set - Gray finish

This consist of CMC6 with MK41 cardioid capsule, SG20 Stand Clamp, B5 Popscreen, wooden box

CMC 6
The capsules of condenser microphones (the only type which we manufacture) can't be connected directly to microphone cables or inputs; a microphone amplifier is required in between. Thus a complete microphone of the Colette series comprises any of the twenty available types of capsules combined with an amplifier.

The CMC 6 is designed for standard 48- and 12-Volt phantom powering. Its circuitry recognizes the supply voltage and adjusts itself automatically. Its performance characteristics remain essentially the same either way; mainly, the difference is that the current drawn at 12 Volts is greater than at 48 Volts. However, the 12-Volt mode consumes less power and might be preferred for battery-powered recording.


The microphone amplifier provides the electrostatic charge which the capsule requires in order to produce a signal. Since only a miniscule amount of current is contained in this signal, amplification of the current is required. To avoid interference to the signal on the way from the microphone to the input of the mixer or preamp, the signal is conveyed at low impedance and in balanced form. The CMC 6 amplifier offers a symmetrical, transformerless, direct-coupled Class A output stage with low impedance, low distortion, and high freedom from interference.

  • flat frequency response
  • extremely low noise and distortion
  • balanced, very low-impedance output
  • can be used with very long cables
  • well-protected against RFI
  • for use with 12- or 48-Volt phantom powering
MK41


SG20
The base of the SG 20 has a 5/8"-27 NS internal thread. A threaded adapter is supplied for 3/8" and 1/2" mounting.

The angle can be varied continuously in the vertical plane.
  • for a microphone of 20 or 21 mm diameter (e.g. CMC, CMD, CMIT or CMBI)
B5
Acoustic foam close-speech popscreen; provides
sufficient protection at normal speaking distances for cardioids and other directional capsules, especially when speech capsules are used. With omnidirectional capsules it may even be used outdoors in light wind. Minimal effect on sound quality.
  • for moderate distances from the person speaking
  • can also be used as a windscreen for pressure transducers
  • negligible effect on sound quality




Share your knowledge of this product with other customers...Be the first to write a review

Browse for more products in the same category as this item:

Microphones > Condenser and Tube Microphones
Microphones > Schoeps Microphones
Microphones