Home > Microphones > Condenser Microphones >

C1, Cardioid Condenser Microphone w/ Free Whirlwind EMC20 20Ft. Mic Cable, Studio Projects

Studio Projects C1 Cardioid Condenser Microphone w/ Free EMC-20 20Ft. Mic Cable

List Price: $249.99
PAS DEAL $249.99
You'll earn 250 points

Availability: Usually Ships in 24 Hours

The following items are included with this product:


C1 (NEW Version) Cardioid Condenser Microphone

w/ Free Whirlwind EMC20 20Ft. Mic Cable,Studio Projects

The Studio Projects C1 is a large diaphragm, fixed-cardioid condenser microphone employing a 1.06 in (27mm) capsule, high quality, low noise amplifier and balanced, transformerless output circuitry. It features switchable -10dB or -20dB pad and 6dB@75Hz or 150Hz high pass filter for added control in various recording applications and a clear, full response expected from a large capsule microphone design.

Versatility is key in the recording arena, and the Studio Projects C1 is a well-proven and award winning tool. It is designed to deliver the finest quality vocal and instrumental recordings and will serve to enhance any professional or project studio at an unbelievably low price.

As a result of uncompromising dedication and advanced production capabilities, Studio Projects will continue to broaden the range of quality pro audio microphones & electronics for today's recording environment.


  • Pressure-Gradient Transducer: 1.06" (27mm) 6um mylar diaphragm
  • High Pass Filter, 6dB/octave@ 75Hz or 150Hz
  • -10db, -20dB Pad


  • Close miking of instruments with high sound pressure levels
  • Announcer's mic for broadcasting/dubbing
  • Home recording and project studios
  • Vocalist recording
  • Spot mic for: wind instruments, strings, percussion and guitar amps

Included Accessories

  • Shockmount
  • Foam wind screen
  • Case

C1 Specifications

Type: Pressure gradient solid state condenser microphone
Polar pattern: Cardioid.
Frequency response: 30~20000Hz.
Sensitivity: 14mV/Pa=-37dB(0dB=1V/Pa).
Output impedance:
<200 Ohm.
Load impedance: >1000 Ohm.
Maximum SPL: 131 dB SPL for 1% THD @1000Hz (0dB SPL=0.00002Pa).
(Line): 27dB (A weighted)---17dB.
Power requirement: 48 +/- 4V.
Current consumption: <2.5mA.
Circuit: JFET impedance converter, discrete balanced output.
Connector: Gold-plated 3-pin XLR
Size: dia: 2.1" length: 8.9"
Weight: 26.9oz
Pad: -10dB, -20dB
Low cut : 6dB/Octave at 75Hz or 150 Hz.

Related Products
PF-SS-B - Split Screen Pop Filter, Middle Atlantic
PAS DEAL $49.95

MA-SS-B, Split Screen Pop Filter, Middle Atlantic

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Microphones > Condenser Microphones