The TC Electronic RS210 2x10" bass amp cabinet adds great speaker
performance to the amazingly compact and powerful RH450 head, while
giving you the portability and light weight you need. The RS210 contains
two custom 10" Eminence speakers, a titanium-diaphragm tweeter, and
very tough 18mm plywood construction. A perfect complement to the RH450,
this cab uses an anti-skid top surface so your components stay put.
Able to handle up to 400 watts, the RS210 is a durable, portable
TC Electronic RS210 2x10" Bass Amp Cabinet Features:
BH500 is the newest addition to our Bass Amp 2.0 line up. Combined with
the all-new BC410/BC212/BC210 cabinet range, it stacks up to become any
rig you need – for small bar gigs, indoor rock clubs, outdoor stadium
concerts, you name it!
- Power handling: 400W
- Enclosure: 18mm plywood side panels, 18mm rounded carved hardwood corners
- Surface treatment: Anti-skid dual component surface
- Porting: Rear porting
- Woofer: Eminence custom 10"
- Tweeter: Eminence 33mm voicecoil, titanium diaphragm
- Tweeter adjustment: L-pad (off - 0dB)
- Dimensions: W x H x D 356 x 664 x 356mm
- Weight: 38 lbs.
The BH500 feature set leaves little to be
desired with its razor-sharp, tone-shaping tools such as TubeTone™,
SpectraComp™ and bass tuned tone controls. Also, the 3 user memories let
you change tone at any given time while the integrated tuner allows you
to tune up silently before you rock.
A conventional compressor is often dominated by the lower string, but
with SpectraComp™, which is taken directly from the original RH450, you
get 'per string' multi-band compression that evens out the compression
across all strings. In short, you get an even and rock solid tone that
cuts through any mix whether you play fingerstyle, with a heavy pick or
slap the strings hard.
The TubeTone™ effect was originally introduced on RH450. Most
transistor designs try to replicate tube sound using one small preamp
tube, but why not take the crucial characteristics of a full preamp and
power amp into account? Both are essential to the sound when you want
that classic tube warmth as well as when you go for a full-on overdriven
rock sound with a massive punch!
BH500 can store three of your favorite tones. For instance, if you
need a nice chunk of overdrive on specific passages, presets are king.
Not to mention, with great sounding bass tones and seamless
switching between them, you will be able to focus on the important thing
- rocking out!
Built-in bass tuner
Every once in a while, you need to tune up, and whenever that
happens, just let the built-in tuner guide you. It's simple, it lets you
tune silently, and it gets you back to rocking in no time.
Tone Controls and TweeterTone
EQ is always a bass essential, so we have equipped BH500 with a great
sounding, 4-band EQ which is perfect for shaping your fundamental tone.
Further, with two contour filters you can scoop the mid-frequencies,
which creates an amazing low-end punch on demand.
control is usually located on the rear side of the cabinet, but on the
BH500 you can simply adjust the tweeter level right from the front
panel. Further, the sound also gets modified slightly with filters
giving you a much more intelligent control over the high frequencies
that are critical for giving your sound that razor-sharp edge.
Just plug and play! And for rehearsing or jamming along you can
connect your portable music player to the AUX input. If you don’t want
to disturb the neighbors, plug in your headphones and the drivers will
be muted automatically. Finally, you can send a signal to a
sound-engineer via the balanced XLR output – or to an audio interface
when you are recording the rock hits of tomorrow!