Home > Computer Audio > Software & Plug-ins > Virtual Processor Software > Effects Plug-ins >

Tube Saturator - Tube Emulation Plug-in (Download), Wave Arts

Wave Arts Tube Saturator

List Price: $99.95
PAS Deal: $79.95
You save $20.00!
You'll earn 80 points



Tube Saturator is the world’s most accurate real time tube amp plug-in. Unlike other tube simulators, which use radically simplified models, Tube Saturator uses state of the art circuit simulation technology to capture every nuance of an analog circuit. With circuit simulation, the analog schematic (consisting of the individual resistors, capacitors, tubes, and so on) completely defines the signal processing. The schematic is converted into a system of non-linear differential equations which is solved at each sampling period, in realtime. That’s mathematical talk for “it sounds exactly like the analog circuit”.

The circuit simulation technology is extremely CPU intensive, and hence we are only able to simulate very simple circuits at this time. A fast computer is highly recommended to run the plug-in. Tube Saturator is in fact a basic circuit consisting of a Baxandall type three-band EQ feeding two 12AX7 triode preamp stages. It’s similar to preamp stages you’d find in a guitar amp, but it is by no means a complete guitar amplifier model— that would be way too expensive to simulate even with today’s fast CPUs. However, it is extremely accurate, and hence you can get the same distortion and tonal characteristics that you’d expect from a real tube preamp.

Use Tube Saturator to add a bit of analog warmth to recordings, or increase the drive for some distortion. You can use it as a saturating peak limiter too.

Increasing the Drive control increases the (digital) input gain while decreasing the (digital) output gain, so you can easily adjust distortion levels. The FAT switch changes the bias circuit of the first preamp stage to increase gain.

Read Tape Op’s Tube Saturator Review
Read Computer Music’s Tube Saturator Review

Sound Samples (by Tim van Geelen)

This is a small industrial beat, with a 303 on top (filter gradually opening up). The first file is the dry signal, then with the 303 driving Tube Saturator hard. You can really hear it getting much more aggressive and fat.

A simple 8 beat, first dry, then with Tube Saturator adding some lows, highs and lots of drive. It really accentuates the low end low-mid ranges and makes everything much fatter.

A muffled vocal line made much warmer, brighter and sizzling with some high-end boost and drive from Tube Saturator.

  • Accurate tube preamp simulator using 64-bit circuit simulation technology
  • Two common cathode 12AX7 preamp stages
  • Baxandall 3-band EQ
  • Drive control for distortion adjustment
  • EQ bypass
  • FAT mode for increased punch
  • Analog style metering
  • No latency
  • Up to 192 kHz sampling rate, depending onCPU speed.
  • Mono or stereo

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Computer Audio > Software & Plug-ins > Virtual Processor Software > Effects Plug-ins
Computer Audio > Software & Plug-ins > Virtual Processor Software
Computer Audio > Software & Plug-ins