Home > Recording > Signal Processors > Processor Accessories >

DBX ZC-FIRE Interface to Fire Safety Systems

dbx ZC-FIRE Interface to Fire Safety Systems

List Price: $81.00
PAS DEAL $64.00
You save $17.00!
You'll earn 65 points

Availability: Usually Ships in 1 to 2 Business Days
Product Code : DBX-ZC-FIRE


DBX ZC-FIRE Interface to Fire Safety Systems

The Zone Controllers offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.

The ZC-FIRE is a dedicated fire safety interface for the ZonePRO products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system.

All information is subject to change without notice.

More Details

The remote device shall provide either output muting or programmable scene selection for the dbx® ZonePRO™ devices. Connection to the fire safety system shall be either through a relay or directly to the control voltage output. The remote device shall have DIP switches allowing identificationwith connection to the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-FIRE remote controller.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Recording > Signal Processors > Processor Accessories
Recording > Signal Processors