 | Made in the USA
Support American made products
Our future depends on it |
|
Built in America by and American, NOT Chinese Slave labor!!!
The Powerflex 4400 is the second release in the revolutionary new
power amplifier series designed by Ashly Audio. Using a state of
the art, high-speed MosFet switching design with spread spectrum
switching technology, the Powerflex 4400 provides uncompromised
power with exceptional efficiency greatly reducing wasted power
(heat) and delivers 4 channels of 275W RMS @ 8 ohms (400W RMS @ 4 ohms) of
superior audio fidelity through four independent channels!
As the name implies, the Powerflex 4400 amplifier satisfies
many audio applications without compromising performance, all in
a 3RU package weighing 46 lbs.
The four channels may be used as
individual, independent power amplifiers with more than enough
power to satisfy nominal audio applications.
Additionally, three
and two channel configurations of the Powerflex 4400 are possible
for even greater flexibility. Channels may be bridged in pairs
delivering 800W RMS @ 8 ohms.
Features include: four amplifier channels, exceptional audio
fidelity, bridgeable channels, switchable high pass filter on
each pair of inputs, level controls located on the rear panel,
XLR/1/4" and euroblock input connections,
5-Way binding post
output connections and a quiet three-speed fan for on-demand
cooling.
Applications include: any multichannel power amplification
application, monitor amp, small FOH system amp, paging systems,
cinema systems, boardroom audio applications, multiple zone
restaurant, bar, theme park or auditorium and DJ systems.
- Four channels of high output power in a 3RU package
- High-Speed Switched MosFet output design with Spread Spectrum
Switching Technology
Specifications:
POWER OUTPUT
(per channel, four channels driven at 1kHz, <.1%THD) 8
Ohms: 275 Watts RMS
4 Ohms: 400 Watts RMS
(bridged mono mode)
8 Ohms: 800 Watts RMS
FREQUENCY RESPONSE
8 ohm: +/-0.5dB 20Hz-20KHz
4 ohm: +/-1.5dB 20Hz-20KHz
FULL POWER INPUT SENSITIVITY
1.47V RMS (5.6dBu)
TOTAL HARMONIC DISTORTION
<0.2% (rated power, 8 Ohms, 20Hz-20kHz)
SMPTE IM DISTORTION (60Hz/7KHz 4:1)
<0.2%, 8 Ohms
OUTPUT HUM AND NOISE
-100dB from full output (20Hz-20kHz, A-weighted)
INPUT IMPEDANCE
10K Ohm balanced, 37K Ohm unbalanced
COOLING
Forced Air, Thermal Sensitive 3-Speed Fan, Front Inlet/Rear
Outlet
INDICATORS
Green signal-present LED and red clipping LED.
Yellow "thermal"LED
Red "protect"LED
CONNECTIONS
Input: XLR - 1/4" (Pin 2 Hot, Tip Hot), Eurobloc
Output: 5-Way Binding Post
POWER REQUIREMENTS
110-125VAC, 220-250VAC, 50/60Hz
Typical Idle Current (4 ohm load x 4 Channels)
120V: 0.9A
240V: 0.5A
Current with Typical Audio Program Material (4 ohm load x 4
Channels)
120V: 7A
SIZE
19"W x 5.25"H x 16.5"D
SHIPPING WEIGHT
53 lbs.
Click here for more information |
