The EP1500 is an extremely musical power amp that can take a whole night's worth of abuse without missing a beat even at 2 Ohms! The EUROPOWER EP1500 is a dependable workhorse that will never let you down.

You get enough real-world Watts to get you through the roughest gigs: 2 x 700 Watts into 2 Ohms, or 1,400 Watts into 4 Ohms bridged mono operation. Experience has probably taught you that there is nothing worse than when your amp runs out of breath. With EUROPOWER, you've got your back covered all the way.

From the deepest bass all the way up to the most subtle highs, you will be amazed at the clarity and richness of sound. This kind of multi-faceted performance was previously possible only with amps costing hundreds more.

The EUROPOWER EP1500 meets the needs of professional musicians, for both installed applications or on the road. No corners were cut in the design process. You can rest assured that these are tough, reliable amps built to last and last. After all, you have come to expect nothing less from BEHRINGER.

Each EUROPOWER has a massive power supply with a low-noise toroidal transformer and lots of headroom, so your music sounds great even when you push the amp to the limit and it stays that way! Add an extremely effective cooling system and you have an amp that is guaranteed to be trouble-free.

Further underscoring our serious commitment to excellence, we use only high-quality, high-speed FAIRCHILD and TOSHIBA transistors that are second to none. As with all BEHRINGER products, the EUROPOWER Series is manufactured in accordance with the ISO9000 certified management and manufacturing system, resulting in a high-quality product that will survive years of the toughest use.

Specifications:

Output Power

20Hz - 20kHz@0.1% THD,
both channels driven

• 8Ω per channel: 260W
• 4Ω per channel: 400W

1kHz@0.1% THD,
both channels driven:

• 8Ω per channel: 280W
• 4Ω per channel: 450W
• 2Ω per channel: 700W

Bridged Mono

• 8Ω, 20Hz - 20kHz, 0.1% THD: 800W
• 8Ω, 1kHz, 0.1% THD: 900W
• 4Ω, 1kHz, 1% THD: 1400W

Distortion: <0.01%

Frequency Response: 20Hz - 20kHz, +0/-1dB
(at 10dB below rated output power): 5Hz - 50kHz (at -3dB points)

Damping Factor: >300@8Ω

Noise: unweighted, 20Hz to 20kHz -100dB

Voltage Gain: 40 x (32dB)

Input Sensitivity, V RMS (@ 8Ω): 1.15V (+3.4 dBu)

Input Impedance: 10kΩ unbalanced, 20kΩ balanced

Controls

• Front: Power switch, gain control (channels 1 and 2)
• Rear: DIP switches (10x)

Indicators:

• POWER: green LED
• CLIP: red LED, 1 per channel
• SIGNAL: yellow LED, 1 per channel

Connectors:

• Inputs: Balanced XLR and 1/4" TRS connectors
• Outputs: "Touch-Proof" binding posts and NEUTRIK SPEAKON

Cooling: Continuously variable speed fan, back-to-front air flow

Amplifier Protection:

• Full short circuit, open circuit, thermal and HF protection
• Stable into reactive or mismatched loads

Load Protection: Turn-on/off muting, AC coupling

Output Circuit Type: Class AB complementary linear output

Dimensions/Weight:

Dimensions (H x W x D): approx. 3 1/2" (88mm) x 19" (482.6mm) x 15 4/5" (402mm)

Weight: approx. 15.7kg (34.6 lbs)

Click here for more information on EP1500