| The “BIG” Philosophy
In
this fast moving high tech world of today, Hard Disk recording has
become the media of choice. Computers have become so fast that the
sampling rate of 192hz and 64 bit word is now common. The new family of
digital converters are now so precise and clean that they can capture
any signal put to them accurately. Thus we have a really defined sound
source. While this is good for some things, it also leaves others cold.
We have come to like the things that analog consoles and tape machines,
along with the tube microphones, have added to the over all texture of
the sound. Now that engineers can mix and edit inside a digital
recorder, the only place to add color is the front end before they
digitize.
The concept of BIG
Sound Microphones is to get as much color out of the front end before
the AD conversion. The whole concept behind our company is to make the
sound BIG or BIG-ER than life. The use of classic tubes and classic
transformers and other components, make the even harmonic overtones go
on for days. With this circuit running hot, we have chosen to
Cryogenically process all major components to give them longer life.
Freezing de-stresses all metal components that have stress bends in
them, i.e. the tubes and transformers.
The ER model features a much larger capsule resulting in a better response in the lower register. The classic circuitry is designed to enhance any vocalist that wishes to add additional substance to their recording.
This mic is a classic example of everything old is new again.
We have combined the best of yester-year, minus the limitations, to deliver the BIG-ER. This is a salute to all those who went before us. We at BIG didn't invent the wheel, we just wanted to make it rounder.
Once you go "BIG", You can only go "BIG-ER". ___________________________________________________________________________________________
NOTES on BIG MICS--from Pro Audio Solutions:
1. Theses mics are running very high voltage.
DO NOT HOT SWAP these mics..
Plug in the power supply to mic cable, cable to your input device, connect the complete signal path, with everything powered off,.
THEN SWITCH ON THE POWER. Reverse this process when you power off.
2. DO NOT apply
phantom power to these mics.This may damage the main transformer.Make
sure that +48 v phantom power is switched OFF on your mic preamp or
interface.
3. Please do not open up the head of the mics, change tubes, or modify components etc.this will void your warranty.
4.
CABLE: We recommend using ZAOLLA silverline cable with these mics. NOT
Monster, NOT Mogami, please use ZAOLLA silverline. This is cable will
yield much better audio results with these mics.
5. Manufacturer warranty is 1 year. Pro Audio Solutions is doubling this warranty to 2 years parts and labor under normal usage.
Who uses the "Big Mics"???
Click here ___________________________________________________________________________________________
|
