*'RM' designates reduced sensitivity. Used for high SPL environments
*PIGTAILS, +3V to +10V bias. 3m cable, stripped cable end for wireless transmitter connector.
*includes HC-11s Horizontal Clip, WS-11 Windscreen, RM-11 Rubber Mount
Superb Sound in Ultra-miniature Lavalier
- New Rugged 2.1mm Cable
- Ultra-Miniature
- Perfect Omni-Directional from 50Hz to 20kHz
- Unique Vertical Diaphragm Layout
- Surface Noise Isolation
- High Durability from Sweat and Cosmetics
- Various kind of Applications
SANKEN COS-11s was designed using the unique "Vertical Diaphragm Layout" which provides superb sound from a microphone so small it is almost invisible.
The COS-11s has perfect OMNI Directional polar patterns from 20Hz to 20kHz, and very natural sound from 50Hz to 20kHz.The frequency response is consciously adjusted to the human voice.
Suitable for a wide range of applications including musical theatre,TV news studio, ENG, TV-movie outdoor shooting and even live opera and pop recording. Available in various models, so that you can immediately use it with your existing wireless transmitter. After changing to the COS-11s from the attached transmitter microphone, you will enjoy a new world of sound.
Also COS-11s has the model
for normal phantom, wireless transmitters of many manufacturers, AA type battery and/or 12V to 52V phantom, and with no connector drivable from 3V to 10V DC.
Now, available in three versions:COS-11s (48V phantom), COS-11sPT (no connector) and COS-11sBP battery powered. Each version has "RED MARK" which is designed for close microphone setting and for loud voice, up to 136dB SPL. Each models is available in three colors:Gray, Black and Beige. Plus there are 11 colors windscreens to fit with any dress, jacket and hair. A wide range of accessories allows easy positioning.
Features:
- 2.1mm rugged cabling resistant to sweat; stays soft and pliable even after extended use
- 20Hz - 20,000Hz with 95dB dynamic range ( PT )
- High output and low noise with extremely smooth omni-directional pattern control
- PPS ( poly-phenylene-sulfide ) diaphragm provides humidity and temperature stability, outperforming all other condenser lavaliers
- Vertical diaphragm placement protects against sweat and spray
- Built-in 3-layer windscreen minimizes pops, sibilance and wind noise
- Assortment of clips, rubber mounts, and outdoor windscreens
- For High SPL Sound souce, Red Mark ( RM ) is available for all COS-11s Series.
| Specifications | COS-11s | COS-11sPT | COS-11sBP |
|
| Transducer type | Back-electret condenser | Back-electret condenser | Back-electret condenser |
|
| Direction pattern | Omni-directional | Omni-directional | Omni-directional |
|
| Frequency response | 20 - 20,000Hz( ± 2dB) | 20 - 20,000Hz( ± 2dB) | 20 - 20,000Hz( ± 2dB) |
|
| Source impedance | Approx.180 Ohms | Approx.700 Ohms | Approx.200 Ohms |
|
| Sensitivity at 1kHz | 17.8mV/1Pa
(-35dB ± 2dB) | 8.9mV/1Pa
(-41dB ± 2dB) | 6.0m V/1Pa
(-44.5dB ± 2dB) |
|
Sensitivity at 1kHz
( Red Mark ) | 6.3mV
(-44dB/Pa) | 3.2mV
(-50dB/Pa) | 2.1mV
(-53.5dB/Pa) |
|
| S/N to IEC 179 | >66dB | >66dB | >66dB |
|
| Equivalent noise level | Less than 28dB SPL
(0dB = 20µPA, IEC 179) | Less than 28dB SPL
(0dB = 20µPA, IEC 179) | Less than 28dB SPL
(0dB = 20µPA, IEC 179) |
|
Max sound pressure
for 1.0%THD | 127dB SPL | 123dB SPL | 120dB SPL |
|
| Max SPL ( Red Mark ) | 136dB SPL | 132dB SPL | 129dB SPL |
|
| Total dynamic range | 95dB Min. | 94dB Min. | 92dB Min. |
|
| Power supply | 48V ±4V Phantom | +3V to +10V | 1.5V lEC R6battery or
12V - 52V Phantom |
|
| Current consumption | 2mA | 0.3mA | 0.5mA(battery) |
|
| Output connector | 3-pin XLR | Connector-less | 3-pin XLR |
|
| Connections | pin-1 = ground
pin-2 = audio hot
pin-3 = audio cold | Shield = ground
White = audio hot
Black = DC power | pin-1 = ground
pin-2 = audio hot
pin-3 = audio cold |
|
| Dimensions | Ø4.0mm x16.1mm | Ø4.0mm x16.1mm | Ø4.0mm x16.1mm |
|
| Supplied accessories | WS-11 windowscreen, RM-11 rubber mount and HC -11s holder clip |
|
| COS-11s"RED MARK" : When you order "RED MARK" version, please add -RM after the model number. |
|
Click here for more information |
