| 96i enables you to readily introduce output from third-party
outboard gear - keyboards, samplers, effects, and other
line-level equipment - into your Pro Tools environment. Its
16 analog inputs provide balanced or unbalanced A/D conversion
using tip-ring-sleeve (TRS) 1/4" connectors. A S/PDIF port
capable of 24-bit digital I/O allows you to connect professional
DAT recorders, CD players, and other digital recording devices.
A/D and D/A converters of the same quality as those of the
Digidesign 96 I/O ensure that your signal's fidelity is
maintained going into and coming out of Pro Tools.
Features
- High-quality, 2U I/O device for instruments and effects
gear
- 24-bit balanced TRS connections: 16 analog inputs, 2 analog
outputs
- Two channels of 24-bit S/PDIF I/O (RCA connection)
- Supports sample rates up to 96 kHz
- Digidesign 96 I/O-quality converters
- Software-adjustable level controls for inputs (six-step for
inputs 1-4, two-step for inputs 5-16); outputs
software-switchable between +4 dBu and -10 dBV
- 108 dB or greater dynamic range
- Support for balanced and unbalanced connections
- Front-panel LEDs for input and output metering
- Multiple units provide up to 96 discrete inputs
- Compatible with Pro Tools|HD cards and peripherals
Dimensions
- Width: 19 in / 48.26 cm
- Height 3.5 in / 8.89 cm
- Depth: 15.13 in / 38.42 cm
- Weight: 13.81 lbs / 6.26 kg
A/D
- Sample Rate: 44.1, 48, 88.2, 96 kHz ±10%
- Dynamic Range: 111 dB (A-weighted), 108 dB (unweighted); see
Notes 1 and 4
- THD+N: 0.0008% / 0.0013% (-102 dB / -98 dB); +5 dBV/+17 dBu;
see Note 5
- Frequency Response: Response: +0.1 / -0.2 dB @ -2 dBu, 20 Hz
- 20 kHz; see Notes 1 and 2
- Differential Input Impedance: >25 kohms
D/A
- Sample Rate: 44.1, 48, 88.2, 96 kHz ±10%
- Dynamic Range: 113 dB (A-weighted), 111 dB (unweighted); see
Notes 1 and 3
- THD+N: 0.003%/0.003% (-90 dB / -90 dB); -1 dBFS @ 997 Hz; see
Note 6
- Frequency Response: +0.1 / -0.4 dB; -20 dBFS, 20 Hz -
20 kHz; see Notes 1 and 2
- Differential Output Impedance: 50 ohms (typical)
Note 1 - Measurement made using +4 dBu input or output
settings
Note 2 - Measured relative to level at 1 kHz
Note 3 - Measured with digital input at -60 dBFS @
997 Hz
Note 4 - ADC measured with analog input level at -42
dBu @ 997 Hz
Note 5 - THD measured with input settings at -8 dBV / +4
dBu respectively
Note 6 - THD measured with output settings at -10 dBV / +4
dBu respectively
Sample Rate = 48 kHz, Noise BW = 22 Hz - 20 kHz
unless otherwise noted, Tambient = +25 C |
