 |
 |
 |
|
The Event S100 Active Low Frequency Monitor gives you the big, beefy
lows you need to transform your studio sound, while its compact size
helps to free up the space you need. The floor-mounted S100 gives you
100 watts of low frequency reproduction from its dependable 8"
low-frequency driver, providing powerful, clean low end to complete
your full-range monitoring system. You can use the S100 Active Low
Frequency Monitor with virtually any active monitor, courtesy of its
flexible inputs and outputs, including a 1/4" mono line input, L/R RCA
inputs, and two RCA pass-through outputs. The S100 provides maximum
accuracy with input sensitivity controls, and - just in case the
neighbors take notice of one of your late-night sessions - a handy
footswitch to mute the output. Housed in a sturdy, floor-coupled
cabinet, the S100 Active Low Frequency Monitor provides plenty of
bottom to take you to the top!
Event S100 Active Low Frequency Monitor Features:
- Low-frequency driver: 8" polypropylene cone with damper, rubber surround and high-temperature voice coil
- Frequency Response: 35Hz-120Hz, -3dB
- Amplifier Power: 100 watts, linear
- Inputs: Mono line input with 1/4" connector; left and right line inputs with RCA connectors; all unbalanced
- Pass-through outputs: Two RCA mains monitor channel pass-throughs
- Controls: Input Sensitivity; Mains Power; Operating Voltage Selection; On/off Mute (footswitch-controlled)
- Power Requirements: 200VA, User-selectable 110V~60Hz or 220/240V~50-60Hz Mains
- Cabinet: 5/8" vinyl-laminated MDF, internally insulated
- Dimensions: 12" x 16-5/8" x 10-3/4"
- Weight: 32 lbs
|
|
|
|
|
|
|
|
| Related Products and Acessories to this item |
|
|
|
|
Other Products from the same category
|
|
|
|
|
