 |
 |
 |
 |
Description
A Merit Series Power Conditioner is the perfect low-cost AC power
solution for any rack mount system. Install an M-8Dx into the top slot
of your rack, and the eight switched outlets in the rear panel will
power up and protect all your equipment up to a 15-amp load. The M-8Dx
features two slide out, swiveling light fixtures to provide discreet
illumination of your equipment on stages, in studios, and in other dark
places. A dimmer knob lets you adjust the lamp brightness to just the
right level.The M-8Dx also features a bright red, three-digit LED
voltmeter that displays incoming voltage.
Features Noise Filtration
AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
15 Amp Rating
15 amp rating, with circuit breaker
Surge Protection
Spike & surge protection ensures equipment stays safe and your power stays clean
9 Total Outlets
8 rear panel outlets and 1 front panel outlet
"Protection OK" Indicator
Front panel indicator LED lets you know that your equipment is being protected
Wall Wart Spacing Indicator
Rear outlets have been spaced to accomodate even the bulkiest of wall warts and adapters
Front Panel Pull-out Lights
Two retractable incandescent light fixtures with dimmer control for convenient rack illumination
Digital Voltmeter
Digital voltmeter display incoming line voltage
Specifications | Maximum Output Current: | 15 amps |
| Line Cord: | 6 ft., captive, 14 AWG, with 3-conductor Edison plug |
| Lamps: | Two 120V incandescent bulbs, 4 watts each |
| Operating Voltage: | 120VAC 60Hz |
| Spike Protection Mode: | Line to neutral |
| Energy Dissipation: | 170 joules |
| Peak Impulse Current: | 12,000 amps |
| Maximum Continuous Opterating Voltage: | 130 VAC RMS |
| Let Through Voltage (@ 125 amps, 8/20uS waveform) | 400 volts |
| Noise Attenuation: | Transverse mode: Greater than 26dB, 200Khz to 10 Mhz |
| Dimensions: | 1.75Ħħ H x 19Ħħ W x 7.5Ħħ D |
| Weight: | 5.8 lbs. |
| Warranty: | Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship. |
Click here for more information
|
|
 |
 |
|
 |
|
 |

|
Other Products from the same category
|
|
|
|
|