| Furman is proud to introduce the new rackmountable
Uninterruptible Power Supply SB-1000, specifically designed for
stage and studio applications. Never again will musicians or
studio professionals need to worry about damaging sensitive
digital equipment or losing hours of studio work in the event of
a power outage.
Onstage, the ruggedly designed and constructed 15-inch 1U
Furman SB-1000 can (safely) keep computer laptops,
micro-processing components, and keyboards running until the user
can (safely) power them down. The SB-1000’s brownout and
surge protection prevent the data loss and corruption that can
cripple sensitive equipment. In the studio, the Furman SB-1000
can safely save and close critical applications and then power
down a CPU and monitor along with additional peripherals, such as
hard drives, CD/DVD burners, etc. The Furman SB-1000’s
passive cooling allows for super quiet operation in critical
listening environments.
FEATURES
The Furman SB-1000 features a generous 1000VA / 600 watts
capacity from its step-up/step-down multi-tap Toroid transformer.
A current overload alarm activates at 10 amps total capacity. An
additional alarm activates when in battery back-up mode. The unit
will provide a 3-minute back-up with a 5-amp RMS load, and
32-minutes of back-up with a typical computer and monitor
load.
Rear View
The SB-1000 features 5 AC outlets, (4 for backup
with a 5 amp total load) and 1 bypass outlet, (4 amps total, for
higher amperage units) so additional computer peripherals and
electronic devices can be safely powered down. Additional
features include adjustable line voltage from 110/115/120 VAC,
two step regulation, and an adjustable line frequency of 50 or 60
hertz. (Internal jumpers). The front panel features convenient
ON/OFF switches for the backup and bypass outlets, a test switch
that allows battery status check, as well as a line/backup
indicator LED.
- 600 watt / 5 amp capacity
- 3 minute back-up at full 5 amp load. 32 minute backup with
typical computer / monitor
- Adjustable input voltage of 110V / 115V / 120 VAC. With
output voltage of 120 VAC
- RS-232 Interface performs monitoring functions and provides
orderly computer shutdown
- Phone and fax line protection
- Includes 19 inch rack mount ears
- UL - CUL listed
Specifications:
Current rating:
5 amps / 600 watts
Over Voltage Regulation:
131 VAC switches to 120 VAC output
Under Voltage Regulation:
109 VAC switches to 120 VAC output
Spike Protection Modes:
Line to neutral, line to ground, neutral to ground
Spike Clamping Voltage:
Initial turn-on at 200 volts; TVSS rating of 400 volts peak at
500 amps, L-N, N-G, L-G (tested to UL-1449)
Response time:
1 nanosecond
Maximum surge current:
6,500 amps
Output:
Two-step square wave
Switching Modes:
Switches to battery backup at 89 VAC low line or 150 VAC high
line, bypasses backup at 95 VAC and 140 VAC
Transverse Noise Attenuation
20 dB at 200 kHz, rising to >40 dB, 1 to 100 MHz
Maximum Load Alarm:
10 amps
Mechanical: Dimensions:
Dimensions: 1.5” H x 15” W x 14.5” D. Weight:
20 lbs (9 kg). Construction: Steel chassis, glass epoxy printed
circuit boards
Power consumption:
15 watts (idle)
Safety Agency Listings:
CUL
Click
here for more information |
