|
Digital Audio signals in the AES/EBU format require an interconnect cable with the correct construction. A mismatch of the impedance, a too small conductor diameter (skin-effect) or an impedance change in a cable run will cause digital errors (jitter) which are causing costly problems on your digital recording. We have found the stability of the impedance the most critical point on an AES/EBU cable and our solution is the "Star-Quad" twisting of the two conductors with two PE-strands to hold the conductors always in place, even when the cable is being bent. Together with our unique "double Reussen shield" we have the perfect signal cable for AES/EBU Digital Audio without compromises in regard to flexibility and handling. The GAC-2 AES is a low loss, flexible AES/EBU cable optimized for use with XLR-connectors or installations with long cable runs (>100m).
Construction:
- 1 = Jacket: PVC, Ø 6.0mm, purple
- 2 = Viscose fiber coat Counter wrapped to the shields
- 3 = Shield No. 1: Bare copper wires (0.10mm) 100% coverage
- 4 = Shield No. 2: Bare copper wires (0.10mm) 100% coverage
- 5 = Stabilisation: PVC foil
- 6 = Cord (2): 'PE', quad twisted with two conductors
- 7 = Insulation: Scum 'PE', Ø 2.0mm, white and red
- 8 = Conductor: Stranded tinned copper wires 7 x 0.25 mm (0.34mm²)
Click here for more information
|
