| The Cricket can test the polarity of wireless microphones, mixers,
effects devices, amps, cables and speakers. Polarity, should it become
reversed, can play havoc with a sound system. If two sources are
emitting the same electrical or acoustic tone (frequency), and one of
those sources is in a state of inverted polarity, those tones, when
combined at a given point, will cancel each other. While cancellation
does not always indicate a complete loss of all sound, it does result
in diminished sound quality. Unlike phase, polarity, at all distances
and times, is either in or out. It's absolute. Galaxy Audio's battery
powered Cricket Polarity/Continuity Test Set makes it easy to determine
whether every component in an audio system - from patch bay to console to
speakers - is in or out of polarity. The Cricket tests balanced and
unbalanced cables of up to 2,000 feet in length. It will drive a "snake" (even one with transformers), and indicate which of a
microphone's XLR connector pins is hot. A glance at the Cricket's red
and green LED's can save hours of trouble shooting. No wonder it's an
indispensable tool for sound system owners, operators and installers. Cricket Send Pulse Generator - Pulse
Waveform Polarity: positive-going balanced lineoutput pulse, switch
selectable for hi or low level balanced signal withpositive pressure
produced at the tip of 1/4" jack and pin #2 of XLR jack.
- Speaker
Output Pulse: Accepts 2 ohm (or greater) loadwith positive pressure
produced at the tip of a 1/4" speaker jack and positiveterminal of an
internal speaker.
- Dimensions (W x H x L): 3.33" x 1.75" x 5.25"
- Weight (with battery): 11 oz
- Battery: 9 volt, alkaline only (not included)
Cricket Receive Pulse Detector - Switches: Internal microphone for testing speakeroutput
- Polarity/Continuity Test: Female XLR pin 2,3,1continuity; 1/4" jacks: tip, ring continuity
- LED
Indicators: Green: indicates positive-going pulsepolarity with power
switch in "ON" position and battery status with Powerswitch in "BAT"
position; Red: Indicates negative-going pulse polarity
- Detection Inputs: one 1/4" balanced, one XLR balanced
- Mic Sensitivity: -64 dB, +3 dB
- Function Select: Polarity only or continuity
- Weight (with battery): 10.5 oz
- Battery: 9 volt, alkaline only (not included)
- Test set Shipping Weight: 3 lbs
|
