| Includes brand new threeQ, a JM27 Joemeek JM27 Condenser Microphone
The JM27 is a small diaphragm condenser microphone with a fixed
Cardioid pattern. Building on the tradition of classic studio
microphones, we combined an FET pre-amplifier with transformer-balanced
output resulting in a low noise, high SPL mic - perfect for a variety
of studio applications. The capsule is manufactured in the classic
"concentric electrode" design, providing smooth extended frequency
response. We further enhanced the audio quality by using dynamic
feedback at the capacitor element. This technique eliminates
distortions, which can occur at high SPL.
The
diaphragm is made from micro-fine Mylar and is gold sputtered. The
microphone body is machined from brass, with audio connection via a
balanced 3-pin XLR connector. Power is supplied via Phantom Power from
either your console or microphone preamplifier.
You'll
find the JM27 performs especially well when used for acoustic and
orchestral instruments as well as in pairs for drum overheads and other
stereo applications. Click here for more information
Joemeek ThreeQ
one channel of professional amp, compressor, equalizer
The Joemeek threeQ is like having one channel of a professional recording studio in a small box. It takes a microphone or instrument, amplifies it, compresses and equalizes it ready to be recorded. Simple to use yet extremely powerful, the threeQ will bring out the best in any microphone or instrument and give the gloss of a professional studio production to all your performances. As well as recording it will also be found useful for live work.
Specifications
- Input impedances: Mic: 1.2kohm; Line: 20kohm
- Pre-amp overall gain: 0dB to 60dB
- Common mode rejection: 70dB
- Equivalent input noise: -128.5dBu (unweighted)
- Distortion:
0.001% (below Compressor threshold)
- Frequency response: 10Hz to 70kHz (-3dB)
- Maximum input before clipping: Mic: +19.5dBu; Line: +44.5dBu
- Headroom before clipping: +19.5dBu
- Compressor threshold: -6dBu to +20dBu (variable)
- Compressor ratio: 5:1 (typical)
- Compressor attack time: 1 msec to 100 msec (adaptive)
- Compressor release time: 0.1 sec to 3 sec (adaptive)
- Nominal output levels: +4dBu/-10dBv
- Output impedance: 75ohm
- Output Level switch: 12dB attenuation
- Noise Floor: -85dBu (typical, with ~40dB mic gain)
- VU Meter: 8 segment bargraph
- Power supply: 12V ac mains adaptor
- Power consumption: 12W
- Mechanical: 220W x 44H x 180D (overall)
- Weight: 1 kilo
- EQ Boost and Cut: +/-15dB (zero phase-shift bell response)
- LF Frequency : 80Hz fixed
- MID Frequency : 300Hz to 5kHz variable
- HF Frequency : 12kHz fixed
Click here for more information |
