C 10:4X - Introduction
The C 10:4X is a versatile 4-channel
amplifier, delivering 4 x 250 W* at 4 ohms, 8 ohms, 16 ohms or 70
Vrms (500 W at 100 Vrms is available by bridging two channels)
from a 2U chassis.
This amplifier is uniquely capable of adapting to a wide variety
of demanding load conditions. Each channel has an individually
configurable Voltage Peak Limiter (VPL), which allows the output
to be optimized for any loudspeaker load – whether a single
large subwoofer or a series of small 70 V loudspeakers (100 V in
bridge mode). VPL works in combination with adjustable input gain
(adjustable in 2-channel blocks) to achieve maximum headroom
regardless of input levels or output impedances. Additionally a
35 Hz high pass filter may be inserted in each 2-channel
section.
Every C Series amplifier is ready for the NomadLink® network
right out of the box. With NomadLink®, key amplifier
parameters are displayed via DeviceControl PC software, and
remote control of channel mutes and power on/off is under network
control.
Read on and learn more by choosing from the topics in the left
hand column.
Click
here for more information |
