 |
 |
 |
|
We Do NOT reccomend this product.
Our choice in both Audio QUALITY and VALUE is the Tannoy TS10 subwoofer CLICK HERE
The BX10s active subwoofer is ideal for any monitoring
environment requiring an accurate low-frequency response down to
20Hz. Comprising a 10" composite driver, 240-watt internal
amplifier, and a variable 50 to 200Hz crossover, the BX10s
delivers tight, clean bass in a compact chassis-perfect for
project studios where space is often at a premium. The BX10s is
suited perfectly for either two-channel stereo or multichannel
surround monitoring environments and is designed to integrate
with any powered direct-field studio monitors, including the
M-Audio BX5a and BX8a active reference monitors. The BX10s even
includes a subwoofer bypass function so you can judge how a mix
will sound without a dedicated subwoofer-controllable via
the included sustain pedal.
Features:
- 10" composite driver
- 240-watt amplifier
- rear bass-reflex port
- variable 50-200Hz crossover with easy settings for Dolby
Digital®, DTS® and THX® compliance
- low frequency response down to 20Hz
- adjustable gain (-30dB to +6dB)
- balanced XLR and 1/4" TRS inputs and outputs
- subwoofer bypass function with 1/4" footswitch
input
- auto on/off “sleep" function
- phase switch (0/180 degrees)
- video shielding for use near CRTs
- removable grill
- removable feet
Specifications:
- Type: bass-reflex active powered subwoofer
- Woofer Driver: 10-inch composite (treated paper/fiberglass)
cone with high-temperature voice coil and damped rubber
surround
- Frequency Response: 20Hz - 200Hz (-3dB points)
- Crossover: HP/LP linked filter sweepable from 50 - 200Hz;
24dB/octave 4th-order alignment
- Input Sensitivity: 85mV pink noise input produces 100dBA
output SPL at one meter with volume control at maximum
- Amplifier: 240 watts average power into 8 Ohms, discrete
transistor design
- Signal-to-Noise Ratio: 86dB (A-weighted)
- THD at Rated Power, Mono Mode: 0.019% (175 W)
- Inputs: two XLR balanced inputs; two TRS balanced/unbalanced
inputs
- Outputs: two XLR balanced outputs for satellites; two TRS
balanced/unbalanced outputs for satellites
- Controls: volume/gain control, 10dB bass boost switch, sleep
mode switch, phase inverse switch, variable crossover control,
subwoofer bypass footswitch jack
- Input Impedance: 20k ohms balanced, 10k ohms unbalanced
- Maximum Input Level: +20dBU
- Auto Turn Off Time: 15 minutes
- Auto Turn On Input Sensitivity: 7.3 mV
- Protection: over temperature, turn-on/off transient, subsonic
filter, external mains fuse, DC protection, over current
protection
- Indicator: power on (blue) or standby/bypass (red)
- Power Requirements: dual-voltage (selectable by rear-panel
switch) for either 100-120V/~50/60Hz or 220-240V/~50/60Hz;
powered via detachable grounded IEC cable
- Cabinet: vinyl-laminated MDF
- Dimensions: 15 in. (h) x 15 in. (w) x 15 in. (d); 38.1 cm (h)
x 38.1 cm (w) x 38.1 cm (d)
- Shipping Weight: 54.6 lbs.; 24.75 kg
|
|
|
|
|
|
|
|
|
Other Products from the same category
|
|
|
|
|
