 |
 |
 |
|
| Combo / Combo Series
Combined XLR receptacle and phone jack. New attractive `front end` design (30% less protruding from panel than original). Saves racks space by combining 2 connectors in one housing. Horizontal or vertical PCB mounting or hard wire soldering. Full normalled. Stereo or mono version. Very low conductor capacitance, therefore suitable for Digital Audio. Fully compatible to the predecessor Combo. Fastening: Self-tapping PT? screws with thread 2.9x1.06 and tri-rondular configuration.
TECHNICAL DATA
Electrical
- Contact resistance: XLR: < 10 m
- Jack: < 20 m
- Rated current: 7.5 A
- Rated voltage: 50 V ac
- Insulation resistance: > 500 M after damp heat test
- Dielectric strength: 1500 V dc
- Capacitance: < 2 pF
Mechanical
- Engagement / separation force: XLR: < 25 N / > 15 N
- Jack: < 25 N / 15 - 25 N
- Solderability: complies with IEC 68-2-20
- Applicable Standard: EIA RS-453 for jack
Materials
- Shell: Polyamid, PA 6.6 30% GR
- Contacts of Jack and XLR: CuSn6
- Contact plating: XLR and switch contacts: galv. Au Jack and Ground: galv. Ag
- Temperature range: -20°C to +65°C
|
|
|
|
|
|
|
|
|
Other Products from the same category
|
|
Neutrik NC3MD-L-B-1- 3-Pin XLRM Panel Mount Connector, BLACK shell, GOLD contacts
|
|
|
|
|
|
|
NADITBNC-MX, in line, 110 ohm to 75 ohm transformer, BNC to BNC
|
|
|
|
|
|
|
Neutrik NL2MP - Speakon Lockable Loudspeaker Connector
|
|
|
|
|
|
|
AAA3MBZ - 3 Pin Male XLR cable mount connector, Black metal shell, Silver pins, Switchcraft
|
|
|
|
|
|
|
YE201A- 1/4-inch TRS Male Connector, nickel, rubber strain relief, 3 conductor,Ningbo electronics
|
|
|
|
|
|
|
