| BRYSTON POWERPAC 60 MODULAR AMPLIFIER
The Bryston PowerPac 60 amplifier, is a no-compromise,
modular, single channel power amplifier delivering 60 watts at 8 Ohms, or 100
watts into 4 Ohms. The PowerPac 60 is a modular monaural version of our very
popular 2B-LP stereo amplifier but designed to be utilized in applications where
portability, sound quality and flexibility are of prime importance.
The PowerPac 60 is a perfect choice for use as a portable
power amplifier which can be attached directly to the rear of your loudspeaker.
This provides for the use of very short speaker leads resulting in a much
improved loudspeaker/amplifier interface. The PowerPac 60 can also be bolted on
the wall for utilization in audio/video surround systems
(left/right/center/rears) where a non-conspicuous power module is required. A
further application would be in multi-room audio systems where single or
multiple amplifiers are needed to provide music in adjacent rooms. Finally, with
the recent popularity in passively or actively amplifying the individual drivers
in your stereo loudspeakers the Bryston PowerPac 60 would be ideal for use in
this capacity.
VERSATILE FEATURES:
- Allows direct attachment or adjacent placement to loudspeakers
- On-wall mounting
- Easy application in any multiple driver active or passive stereo system
- Balanced or unbalanced operation at the flick of a switch
- Gold plated 5-way banana jacks, RCA and XLR connectors
- Ground lift switch to reduce annoying hum
- Level control adjustment
- Detachable power cord.
Specifications:
| Power Output |
60 watts at 8 ohms
100 watts at 4 ohms |
| Distortion |
Less than 0.009% from 20Hz to 20kHz at 60 watts, IM or
THD |
| Noise |
>101db below full output |
| Slew Rate |
Greater than 60 volts
per microsecond |
| Power bandwidth |
Less than 1Hz to over 100kHz |
| Damping factor |
Over 500 at 20Hz, ref. 8 ohms |
Input sensitivity
and impedance |
0.75V in for 60 watts out,
10k unbalanced
20k
balanced |
| Features |
- Over 600 cm/square of heatsinking:
over 2000 cm/square with chassis
- Regulated power supplies all voltage gain stages
- Gold plated input and output connectors
- Switchable balanced XLR 1/4 inch and RCA unbalanced
inputs
|
A/C Power
Consumption &
Heat Load |
| 1. Idle Current |
18W |
| 2. 8 Ohms (60W ea.) |
144W |
| 3. 4 Ohms (100W ea.) |
252W |
| 4. Max. Wattage |
252W |
| 5. Max. Heat Dissipation |
152W / 519 Btu/Hr | |
| Warranty |
20 years parts, labour, shipping one way |
| Dimensions |
(LHW) 12 x 1.8 x 7.1 inches 30.5 x 4.7 x 17.9 cm.
Weight 5.7
lbs, 2.6kg |
Click here for
more information |
