A fully time-aligned, 3-way active system utilising Dual Concentric™ plus SuperTweeter™ drive units, the Ellipse 10 has a frequency response extending to above 50kHz for monitoring of wideband programme material.

Ninety degree horizontal dispersion gives you a wide sweet spot for practical working across the console, while analogue signal processing achieves an exceptionally flat frequency response in use.

Discrete MOSFET power amplifiers, with generous power supply, provide more than ample power with extremely low noise and distortion.

The unique cabinet shape not only has a striking appearance but is inherently stiff. Constructed of laminated birch with a massive MDF baffle and rear panel, the enclosure is non-resonant acoustically and mechanically.

TECHNICAL SPECIFICATIONS

PERFORMANCE
Frequency response	30Hz - 50kHz
Maximum SPL	(pair @ 1m) 114dB (anechoic)
Typical max SPL (pair @ mix position)	118dB
Distortion	<0.5%
DRIVE UNITS
Driver type	254mm (10") Tannoy Dual Concentric
SuperTweeter	25mm (1") Wideband SuperTweeter
Dispersion	90 degrees horizontal (@6dB)
ELECTRONIC SYSTEMS
Amplifier Inputs	22k balanced via XLR
Input sensitivity	+4dBu to -10dBu continuous
Power rating	LF: 200W, HF: 200W, ST: 30W
Signal/Noise Ratio	>100dB
Multi-function LED indicator	Green for: System on, Red for: Stabilisation pior to system on. Fault (such as DC), thermal trip, clipping of LF amplifier, Yellow for: VLF warning (presence of subsonic signals below 20Hz, increasing in sensitivity down to 1Hz)
Trim Controls	Hi: Shelving filter +/-3dB @ 25kHz (+/-1dB @ 4.5kHz), Mid: Bell filter +/-2dB @ 1.4kHz - 0.45Q, Low: Variable alignment LF hi-pass filter +/-3dB @ 45 Hz (+/-1dB @ 90Hz)
CROSSOVER
Frequency	1.7 kHz - 14 kHz
CONSTRUCTION
Enclosure type	Laminated birch, reflex ported
Volume	32.6 Litres
Dimensions	423mm x 540mm x 380mm (16 5/8 x 21 1/4 x 15")
Mains voltage	100 - 120 V / 220 - 240 V 50 - 60 Hz
Mains fuse	T2.5A 250 V, T5.0A 125 V
Weight	21kg (46.2lbs)
Finish	Grey suede paint (black on SuperTweeter)
Front baffle	panel MDF