 |
 |
 |
|
Tannoy iDP™ (Interactive Digital Programming) technology
provides a powerful digital solution to precision defined
acoustics and ultimate monitoring flexibility. Precision
iDP™ studio monitors incorporate a host of technology,
including DSP, networking intelligence and class D digital
amplifiers, along with a fully re-engineered Dual
Concentric™ driver and WideBand™ technology. All
these factors combine with iDP™ to provide the professional
user with an exceptional level of performance, operation
convenience and complete control over the entire monitoring
operation.
Features:
- 32kHz to 96kHz sample rate support
- Preset storage / recall and total acoustic alignment
flexibility
- ‘Real time’ control of bass management, preset
recall, solo / mute functions etc
- Bass management with selectable frequency crossover
points
- Individual loudspeaker optimization
- Global level control
- Programmable reference levels
- Acoustic tuning via a comprehensive array of EQ parameters
and alignment facilities
- AES/EBU input for direct digital interfacing
- Full Networking capability for both audio and control within
the digital domain
- Complete manipulation of any speaker parameter on the network
using PC-iP™or iDP SOFT™
- 2.1, 5.1, 6.1 and 5.3 set-ups supported
Specifications:
| System (Master & Slaves) |
| System |
3-Way semi-active near field monitor |
| Frequency Response (1) |
43Hz – 51kHz (+/- 2dB) |
| Max. SPL (@ 1m) (2) |
120dB (continuous) |
| Dispersion (-6dB) |
90 degrees |
| Crossover Frequency |
1.7kHz (DSP generated) & 16kHz (passive) |
| Drive Units |
200mm (8") Tannoy Dual Concentric™ constant
directivity driver with multiple fibre paper pulp cone. 25mm
(1") titanium dome WideBand™ SuperTweeter™,
Neodymium magnet system |
| Cabinet LF Alignment |
Optimised bass reflex loaded |
| Dimensions (H x W x D) |
440mm x 272mm x 369mm (17 3/8” x 10 3/4” x 14
1/2”) |
| Cabinet Construction |
MDF cabinet and front baffle, tongue and groove front and
back. Black cabinet grey painted baffle with brushed aluminium
inlay. Black anodised aluminum back plate |
| Total weight |
17 kg (37.4lbs) |
| Electronic System |
| Mains Voltage |
100 to 240Vac, 50 – 60Hz (auto – select) |
| Power Consumption |
45W @ 1/8 full power (IEC 6065) |
| Amplifier |
Bass/midrange – 200 Watts Class D, Tweeter &
SuperTweeter™ - 200 Watts Class D |
| System Sample Rates |
| Internal |
96 kHz (except when slaved to digital input or word clock
input) |
| External |
96, 88.2, 64, 48, 44.1 or 32 kHz (optional 192kHz) |
| Digital Section (Master only) |
| I/O connectors |
XLR (2 channels AES/EBU in). 3 x RJ45 proprietary TC
LINK |
| Formats |
AES/EBU |
| Word Clock Input |
BNC, 75 , 0.6 to 10 Vpp |
| Display |
2 x 16 character dot matrix |
| Operation |
Menu system / four buttons |
| Analogue Section (Master only) |
| Input connectors |
XLR balanced (pin 2+, pin 3-) |
| Impedance |
10/3 k (balanced/unbalanced) |
| Selectable Full Scale Input level |
+9, +15, +21, +27 dBu |
| Dynamic Range |
> 113 dB typ. (unweighted), BW: 20-20kHz |
| THD+N |
< -105 dB typ. @ 1 kHz, -3 dBFS |
| Crosstalk |
< -120 dB, 20 Hz to 20 kHz |
| A to D Conversion |
24 bit (Dual bit delta sigma sampling at
4.1/5.6/6.1/6.1MHz) |
| Slaves Only |
| I/O connectors |
2 x RJ45 proprietary TC LINK |
| The typical listening distance for Precision 6
iDP“ is 1-2m. The typical room size for Precision 6
iDP“ is 40-90 m3 |
| NOTES |
(1) +/- 3 dB, measured at 1m in an anechoic chamber. (2) Peak
SPL at mix position for 1 pair driven. |
| Tannoy operates a policy of continuous research
and development. The introduction of new materials or
manufacturing methods will always equal or exceed the published
specifications which Tannoy reserve the right to alter without
prior notice. Please verify the latest specifications when
dealing with critical applications. |
Click here for more information
|
|
|
 |
|
 |
|
|
| Related Products and Acessories to this item |
|
|
|
|
