| Specifications:
- Peak output power: 200Watts RMS
- Low frequency response: 32Hz
- Inputs: 2 x line level phono, 2 x XLR balanced
- Input filter: 2nd order low pass, 50Hz - 150Hz, -6dB
- Auto mute: After approximately 12 minutes in absence
of input signal
- Driver type: 200mm (8")
- Enclosure type: Closed box
- Volume: 12.5 litre / 0.45cu.ft
- Dimensions: 292 x 280 x 255mm (11 1/2 x 11 1/2 x 10 inches)
- Additional features: Phase control, Crossover defeat switch for LFE operation, Soft limiting to avoid overload, LF extension control
- Mains voltage: 120V nominal AC~, 60Hz, 230V nominal AC~, 50Hz
- Mains fuse: 120V - T2AL / 250V, 230V nominal AC~, 50Hz
- Weight: 7.0kg / 15.4lbs
- Finish: Black
Tannoy's TS range of active subwoofers, designed for studio
monitoring and playback of multi channel recordings, offer incredibly compact
designs without compromising their powerful and punchy dynamic bass performance.
An exceptionally sturdy and rigid cabinet is the basis of each of the three
models, ensuring a extraordinary control of the drive unit and minimising
unwanted cabinet resonance. Each utilises a substantially built, down-firing
drive unit with an oversized magnet system. The massive roll surround allows
substantial cone excursion providing the necessary air movement to ensure very
extended low frequency output; 26Hz (-6dB) in the case of the TS12 with usable
output down as low as 15Hz.
Occupying less than a cubic foot of space including the cone-shaped spiked
feet, the TS8 is ideally suited to small home studios, while the TS10 and 12
have the performance to deliver in professional postproduction and mastering
facilities.
BASH® amplifier technology is utilised in these subwoofers; a patented high
efficiency power amplifier circuit topology that has taken the best of Class D
and Class AB and created a new Class of its own. The digital power amplifier
with its patented switch mode power supply delivers exceptional performance and
excellent bandwidth with long-term reliability. Very high-power amplifiers are
fitted (200 / 300 and 500 Watts RMS to the TS 8 / TS10 and TS12 respectively)
ensuring there is ample power to reproduce dynamic movie scores.
Achieving the optimum settings is easy; low frequency extension can be varied
from around 60Hz down to the unit's lowest operating frequency via a control on
the rear panel to allow the subwoofer to be adjusted to match the relative
frequency in relation to the main monitor system. Versatile connectivity is
offered through a selection of input and output sockets; stereo line level
inputs can either utilise or bypass the system's internal crossover circuitry.
XLR sockets are provided for direct connection to the mixing desk and output to
active main speakers. The output can be selected as either a direct feed or
switched to provide an 80Hz HIPASS function.
Other features include an auto power on and sleep function whereby the system
will go into a 'stand-by' mode if no signal is detected for approximately 12
minutes. Soft-clip limiting is incorporated to limit the maximum sound output in
order to eliminate audible distortion. Gain and phase controls are provided to
allow easy adjustment for output level and precise matching with the room and
the rest of the system.
The Tannoy TS range of subwoofers deliver a tightly controlled performance to
faithfully reproduce the impact, punch and drive of the mix track.
Click here for more information |
