Home > Pro Video >

TPRO-TXD 1RU x 1/4 Wide Brick Transmitter, FSR
TPRO-TXD 1RU x 1/4 Wide Brick Transmitter, FSR

-------------- Alternate Views: ---------------

List Price: $299.00
PAS DEAL $299.00
You'll earn 252 points

Availability: Usually Ships in 24 Hours
Product Code : TPRO-TXD


The TPRO-TXD Wide Brick Transmitter forms part of FSR's TwisterPro UTP Transmitter/Receiver system. Combined with an optional TPRO-RX receiver, this transmitter allows for long-distance transmission of RGB video, stereo audio, RS-232 data and IR control data. Offering the highest level of signal integrity and error-free transmission, this system uses affordable, easily installed Cat-5/5E/6 cable--a major advantage over bulkier, traditional video and data cables.

Through cable runs of up to 1000 feet, the TPRO-TXD uses RJ-45 connections to transmit not only all RS-232 and IR data, but video resolutions up to 1920 x 1080 and 24-bit stereo audio @48kHZ. A single VGA port handles RGB, component, composite or S-Video signals, while RS-232/IR data is carried over a 4-pin Phoenix plug. Full expandability is possible using optional 1-in/8-out hubs, which can be cascaded to allow up to 512 outputs.

The TPRO-TXD is ideal for control rooms, classrooms, houses of worship, boardrooms and other applications needing reliable video, audio and data transmission with no electrical interference. Its "brick" style housing can be used on any surface, or it can be rack mounted with an optional rack mounting kit.

Note! This is only one component in a larger system. In order for this unit to work properly it must be paired with a receiver. AC adapter is also purchased separately.

VGA 15-pin DSub female connector for video input
4-pin Phoenix plug for RS-232/IR input
CAT-5 and UTP connections are via RJ-45 connectors (EIA/TIA-568B)
Video resolutions up to 1920 x 1080 (1080p)
Compatible with RS-232 standards, most IR devices
Simplex RS-232 up to 19.2k baud
LED indication of video, RS-232 and IR data activity
Custom carrier frequencies are available per customer request
Extends IR control up to 1000 feet
Normal and high output emitter power level settings
High output power level settings up to 60mW allows for multiple emitter connections (emitters sold separately)
Integrated IR sensors in addition to hard-wired input options
UL and CSA approved external power source (wall plug-in) included
High quality 24-bit stereo 48 kHz sample rate
Over-current sensing with LED indication
Optional 1 in/8 out TPRO-HUB with power supply available
Unit can be powered at either transmitter or receiver end, or through optional hub

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Pro Video
Pro Video > Video Switchers / Scalers/ Controls