 |
 |
 |
|
| The Universal Audio 2-610 is a two-channel tube microphone preamplifier based on the legendary Universal Audio 610 modular console. Third in the Universal Audio Classics product line, the 2-610 follows the 1176LN Limiting Amplifier and Teletronix LA-2A Leveling Amplifier in our commitment to authentic analog recording technology. Designed by Bill Putnam, the Universal Audio 610 was among the first modular recording consoles. Early Universal Audio consoles were used in all of Putnam's studios including Universal Recording in Chicago and United Western in Los Angeles. Many prominent engineers such as Bruce Swedien began their careers in these studios with this classic rotary knob console. The UA 610 was particularly well noted for its preamplifier, and has left its mark on countless classic recordings from Sinatra to Pet Sounds to Van Halen to LA Woman. We carefully modeled the UA 2-610 after the microphone amplifier section of the 610 console. Unlike many vintage "style" mic pres, the 2-610 is true to the design of its predecessor. Our expertise in analog design translates into a classic tube preamplifier with all of the character of its vintage predecessor, yet designed for the requirements and rigor of the modern studio. We've taken great care to preserve the quality and character of the original, while adding functionality with more boost/cut settings, phantom power, direct inputs and impedance controls. The Universal Audio 2-610 Mic Pre is the perfect tool for tracking and ideal when used in conjunction with a Universal Audio compressor such as the 1176LN and Teletronix LA-2A. Whether you're running pure analog or seeking to enhance your digital audio workstation, the 2-610 will bring classic tube character to your recording. Features
Two channels of tube pre-amplification
Inputs - Microphone (Female XLR)
- Balanced Line (Female XLR)
- Unbalanced Line/Instrument (1/4" jack) (DI)
Outputs Front Panel Controls - Input Select
- Microphone: 500 ohm, 2 kOhm
- Balanced Line
- Hi-Z instrument: 47 kOhm, 2.2 MOhm
- Variable Gain / Input Feedback control
- 5 dB increments @ -10, -5, 0, +5, +10 dB
- Output Level Control
- HF Shelf EQ
- Switchable boost/cut: 1.5, 3, 4.5, 6, 9 dB
- Corner Frequency Select: 4.5 kHz, 7 kHz, 10 kHz
- LF Shelf EQ
- Switchable boost/cut: 1.5, 3, 4.5, 6, 9 dB
- Corner Frequency Select: 70 Hz, 100 Hz, 200 Hz
- Polarity Reverse Switch
- 48 Volt Phantom Power
Vacuum Tube Complement - 1 each �?12AX7 and 6072 per channel
Specifications - MICROPHONE INPUT IMPEDANCE Selectable, 500 ohms or 2K ohms
- BALANCED LINE INPUT IMPEDANCE 13.8K ohms
- Hi-Z INPUT IMPEDANCE Selectable, 2.2 Meg ohms or 47K ohms
- MAXIMUM MICROPHONE INPUT LEVEL +3.5dBu
- MAXIMUM OUTPUT LEVEL +20dBm
- INTERNAL OUTPUT IMPEDANCE 60 ohms
- RECOMMENDED MINIMUM LOAD 600 ohms
- FREQUENCY RESPONSE 20Hz to 20kHz +/- 1 dB
- MAX GAIN 61 dB SIGNAL TO NOISE RATIO Greater than 82 dB
- VACUUM TUBES One 12AX7A and one 6072A per channel
- POWER REQUIREMENTS 115V / 230V
- DIMENSIONS 3.5 inches vertical, for mounting in standard 19-inch rack
- WEIGHT 11.75 lbs.
Click here for more information |
|
|
|
|
|
|
|
| Related Products and Acessories to this item |
|
|
|
|
Other Products from the same category
|
|
|
|
|
