URS 1980 Compressor/Limiter/Side Chain Includes:
URS 1980 Compressor/Limiter/Side Chain
URS 1980 Compressor only version
Audio Units and VST WinXp + Mac OSX support now included!
URS 1980 Classic
Console Compressor Limiter ��
URS 1980 Classic Console Compressor digitally recreates a popular
1980's British Console Buss Compressor.
High Res 48
bit Double Precision processing
and separate "Brick Wall" Limiter
Chain with High and Low Pass Filtering
1980 Classic Console Compressor features digital recreation
of the IC input and voltage controlled gain reduction amplifier (VCA)
48 bit "Double Precision" processing
The URS Classic Console Compressors
TDM versions feature Hi Resolution 48-bit TDM and 64-bit RTAS
"Double Precision" processing for
increased clarity, headroom and unparalleled gain reduction. Hi Resolution
"Double Precision" processing helps to avoid internal clipping in the Digital
Compressor and Limiter sections
The Compressor and Limiter sections
are totally independent of each other. Both feature separate variable
Attack, Release and Threshold controls.
Internal Side Chain Filtering
The Internal Side Chain High and
Low Pass Filters fine tune how narrow or "Broad Band" the URS Classic Console
Compressor will affect the program material. Both Filters completely
overlap to dial in problem frequencies.
The Listen Key is after the Filters
section. The Listen Key allows you to monitor the signal being sent to
the Gain Reduction detection circuit.
The URS Classic Console Compressors
signal flow inserts the Gain Makeup control before the final Limiter.
This is the secret to how hard you can hit the final "Brick Wall"
Limiter. The URS Classic Console Compressors utilize Feed-back gain
sensing. Feed-back gain sensing gives Compression and Limiting a
servo type of control. See the detailed signal flow diagram below.
Sound with Modern Features
The URS Classic Console Compressor
adds other powerful modern features such as totally variable Compression
Ratios, Attack and Release times.
Two different URS 1980 Classic Console
Compressor plug-ins are included in this bundle.
version includes :
• Compressor/ Limiter / Side Chain
• Compressor only version
The 1980 Compressor /Limiter / Side
chain version has a modern "Brick Wall Limiter that was not found
on the vintage unit. The 1980 Compressor /Limiter / Side chain version
is also well suited for drum Sub groups, Aux sends (TDM versions) and highly
recommended especially on the Mix Bus.
The 1980 Compressor only version
is also 3x more DSP efficient. The 1980 Compressor Only version will
act as a Limiter when the ratio is set at 10:1 and above.
Pro Tools 7.4.x and Leopard OSX 10.5.x
Pro Tools 7.x.x and Tiger OSX 10.4.x
Pro Tools 6.9.2 and Tiger OSX 10.4.x
Pro Tools 6.9.2 and Panther OSX 10.4.x
Pro Tools 6.7 and Panther OSX 10.3.9
Pro Tools 6.2.3 and Jaguar 10.2.8 compatibility
Pro Tools 5.3.1 and Mac OS9 compatibility
Pro Tools 7.x.x M-Powered version compatibility
Full Windows XP support!
Full Pro Tools TDM support for Pro Tools|HD
Accel, Pro Tools|HD and Pro Tools 24|MIX systems
Full 192 kHz support for TDM, RTAS and
Full ProControl, Control|24, Command|8
and Digi 002 support
Full ICON Console Control Surface support
— including center section Dynamics panel
Supports Mbox, Digi 001, Digi 002, Digi
002 Rack, Pro Tools|24 MIX, Pro Tools|HD and Pro Tools|HD Accel and M-Audio
Audio Units support for Logic Pro 7.x,
Logic Audio 6.x, Digital Performer 4.x, Bias Peak 4.x, Abelton Live 4.x,
Final Cut Pro and more!
VST support for Mac and PC Cubase, Nuendo,
Sonar, Abelton Live, Acid, Sound Forge, Bias Peak and more!
Gain Make up Output Control
Separate Limiter and Compressor Threshold
Variable Limiter Attack Time .1ms -
Variable Limiter Release Time 10ms -
"Brick Wall" Limiter Ratio fixed at
Variable Compressor Attack Time 1ms
Variable Compressor Release Time 100ms
Selectable Compressor Ratio 1:1, 2:1,
3:1, 4:1. 6:1, 8:1, 10:1, 20:1. Infinity
Variable Hi-pass Filter Side chain
@ 12dB per Octave 20hz to 5K
Variable Lo-pass Filter Side chain
@ 12dB per Octave 20Khz to 1k
External Side Capability for ProTools
TDM systems and other Host Applications where supported
Gain Reduction Meter
In / Out Bypass switch - selectable
Limiter, Compressor or both
Line input Trim offers -10 to +20 gain
variable to .1db
Plasma Style Input and Output VU Meters
9 per HD Accel chip and 4 Instances per HD chip and 2 per MIX chip
Compressor only Instances - 17 per HD
Accel chip and 8 Instances per HD chip and 4 per MIX chip