Home > Live Sound > Power Amplifiers > Power Amplifiers >

Ashly TRA-4075 - Power Amplifier 4x75W @ 4Ohms w/ Xfmr Isolated 25V, 70V, & 100V Outputs


Ashly TRA-4075 - Power Amplifier 4x75W @ 4Ohms w/ Xfmr Isolated 25V, 70V, & 100V Outputs


 
-------------- Alternate Views: ---------------


List Price: $1,699.00
PAS DEAL $1,349.00
You save $350.00!
You'll earn 1210 points
Mfg Model SKU TRA-4075
.



Availability: YES, in stock

Product Code : TRA-4075
QTY:

DESCRIPTION
 

The Ashly TRA-4075 is a 4-channel convection-cooled rackmount P.A. or installation power amplifier housed in a rugged 2RU metal chassis, offering an output of 40 Watts per channel at 8 Ohms, designed to drive 4 and 8 Ohm loads and transformer-coupled 70V and 100V lines simultaneously. The coupling transformers are internally mounted.

The TRA-4075 incorporates a switch-mode-power supply and Class-D amplifier circuitry, providing a power-efficient solution. The low-noise unit features a switchable HPF filter and selectable gain sensitivity, turn-on delay DIP switches with up to 8 seconds of delay available, and rear-mounted set-and-forget gain controls.

The TRA-4075 is equipped with an internally switchable 120V/240V power supply, extensive protection circuitry, and standard Euroblock inputs along with screw terminal outputs.

Key Features

  • 2RU rackmount 4-channel power amplifier with 40 Watts per channel power output at 8 Ohms and built-in 60W/70V transformer
  • Designed to simultaneously drive 4- or 8-Ohm loads and 70V/100V transformer-coupled lines
  • 2-stage high-efficiency switched mode power supply with high power-to-weight ratio
  • Ultra-quiet convection-cooled operation
  • On-board 80Hz HPF, selectable gain sensitivity
  • Up to 8 sec. of turn-on delay with selectable Dip Switch complement
  • Comprehensive amplifier protection circuitry includes: Output Over-current, DC Output, Main Supply Rail Over-voltage, Chassis Temperature, Inrush Limiting, Mains Fuse
  • Front Panel Indicators include: overall power, standby, and protect; per-channel clip and signal indicators
  • Euroblock input connectors, Screw Terminal outputs

Specifications:

Power Rating Stereo @ 8 Ohms: 4 x 40W per Ch.
Stereo @ 4 Ohms: 4 x 75W per Ch.
Stereo @ 70V: 4 x 75W per Ch.
Stereo @ 100V: 4 x 75W per Ch.
Damping Factor >200, 8-Ohm load, <1kHz
Input Sensitivity 1.5V
Input Impedance 20 kOhms, Balanced
Gain Selectable 26dB or 36dB
Frequency Response 20 Hz - 20 kHz, +/-1.0dB
Signal-to-Noise Ratio >98dB, 20Hz - 20kHz unweighted
Total Harmonic Distortion (THD) <0.01% (8-Ohm load, 10dB below rated power, 20Hz - 10kHz
Input Connections 4 x Ch.1,2,3,4 3- Pin Euroblock
Output Connectors 4 x Ch.1,2,3,4 Screw Terminals
Controls Front Panel 1 x Power Switch
Controls (Rear) 4 x Gain Control Knobs
4 x Delay DIP Switches
4 x 80Hz HPF On/Off Buttons
4 x Gain Sensitivity Buttons
Indicators 1 x Blue Power On LED
1 x Yellow Standby LED
1 x Red Protect LED
4 x Red Clip LED's
12 x Green -24/-18/-12dB Signal LED's
8 x Yellow -6/-3dB Signal LED's
Cooling Convection-cooled
Power Consumption 37.5W (1/8 Power Pink Noise @ 4 Ohm)
Typical Current:
Idle: 0.52A
1/8 Power: 1.24A
Dimensions 19 x 3.5 x 11" (483 x 89 x 279.4mm)
Weight 29.5 lb (13.4 kg)
Specialties Adjustable Turn-On delay Switches
Convection Cooling
Switch-Mode Power Supply


Related Products
Ashly WR-2 - Wall Remote, 4-position pushbutton select Ashly WR-1 - Wall Remote, dual rotary potentiometer
PAS DEAL $149.00

Add
PAS DEAL $129.00

Add
Ashly WR-2 - Wall Remote, 4-position pushbutton select Ashly WR-1 - Wall Remote, dual rotary potentiometer




Share your knowledge of this product with other customers...Be the first to write a review

Browse for more products in the same category as this item:


Live Sound > Power Amplifiers > Power Amplifiers
Live Sound > Power Amplifiers
Live Sound