Home > Microphones > Dynamic Microphones >

Audio-Technica ATM650 HyperCardioid Dynamic Instrument Microphone


Audio-Technica ATM650 HyperCardioid Dynamic Instrument Microphone


 
-------------- Alternate Views: ---------------


List Price: $99.00
PAS DEAL $99.00
You'll earn 99 points
Mfg Model SKU ATM650
UPC Code 4.96131E+12
.



Availability: YES, in stock

Product Code : ATM650
QTY:

DESCRIPTION
 
Output from the microphone's XLRM-type connector is low impedance (Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output phase is "Pin 2 hot" - positive acoustic pressure produces positive voltage at Pin 2.

To avoid phase cancellation and poor sound, all mic cables must be wired consistently: Pin 1-to-Pin 1, etc. For a high-impedance (Hi-Z) mic input, connect a Lo-Z balanced cable to a Hi-Z matching transformer (A-T CP8201 or equal) at the equipment input.

When using the ATM650 in settings with a stage monitor speaker, the speaker should be located 135° off axis (45° off the rear of the microphone). This placement, in conjunction with the microphone's uniform hypercardioid pickup pattern, will virtually eliminate the possibility of undesired audio feedback.

Take care to keep foreign particles from entering the windscreen. An accumulation of iron or steel filings on the diaphragm, and/or foreign material in the windscreen's mesh surface, can degrade performance.

Note: Remove the rubber sleeve at the base of the microphone handle to use the AT8471 isolation stand clamp (not included) for more secure, permanent installation.

Features:

  • Tailored for extended-range, high-fidelity vocal reproduction
  • Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Durable performance for professional applications
  • Special dual-wall floating construction reduces handling noise and assures consistent performance from mic to mic
  • Hi-ENERGY® neodymium magnet for articulate vocal reproduction
  • Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged, all-metal design and construction for years of trouble-free use

ATM650 SPECIFICATIONS†

  • ELEMENT: Dynamic
  • POLAR PATTERN: Hypercardioid
  • FREQUENCY RESPONSE: 80-17,000 Hz
  • OPEN CIRCUIT SENSITIVITY: -56 dB (1.5 mV) re 1V at 1 Pa*
  • IMPEDANCE: 300 ohms
  • WEIGHT: 279 g (9.8 oz)
  • DIMENSIONS: 164.2 mm (6.46") long, 38.8 mm (1.53") diameter
  • OUTPUT CONNECTOR: Integral 3-pin XLRM-type
  • ACCESSORIES FURNISHED:
    • AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands;
    • 5/8"-27 to 3/8"-16 threaded adapter;
    • soft protective pouch

†In the interest of standards development, A.T.U.S. offers full details on its test methods to other industry professionals on request.
*1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL Specifications are subject to change without notice.





Share your knowledge of this product with other customers...Be the first to write a review

Browse for more products in the same category as this item:


Microphones > Dynamic Microphones
Microphones > Instrument Microphones / Drum Microphones
Microphones