Home > Recording >

Empirical Labs EL-Q Lil FrEQ ELQ Lil FrEQ 1U, 4-band parametric EQ with de-esser


Empirical Labs EL-Q Lil FrEQ - Single Channel EQ


 
List Price: $2,699.00
PAS DEAL $2,499.00
You save $200.00!
You'll earn 1699 points
Mfg Model SKU EL-Q
.



Availability: YES, in stock

Product Code : EL-Q
QTY:

DESCRIPTION
 

Empirical Labs EL-Q Lil FrEQ - Single Channel EQ

The EQ Sections

HP - The High Pass section is a sharp filter that cuts all content below one of eight pre-selected frequencies. We call this particular filter a "colored" filter since it is very steep and has a special shape that prevents thinning out frequencies just above the "cutoff" frequency. The corner frequency is indicated by LEDs that glow softly when the section is bypassed, and brightly when the section is engaged. As with all the EQ sections in the Lil FrEQ, there is a dedicated bypass switch.

High and Low Shelving - These are very similar to your standard "Tone Controls", but extremely high performance, providing exceptionally smooth boost and cut on the "bass" and "treble" frequencies.

Parametric EQ Sections - There are four sections of fully parametric EQ... possibly the cleanest parametric EQ section ever produced- operating below .0007% THD (Total Harmonic Distortion) at extremely high audio levels. Try finding those specs anywhere else!

Dynamic EQ Section - The DS section combines filters with a compressor-like circuit that can help contain and control excessive high frequency content such as sibilants, especially in the absence of other lower frequency content. There are two modes of operation, with threshold control as well as a frequency select control. There are four LEDs that indicate the amount of Gain Reduction: -1.5dB, -8dB, -14dB, -24dB. The DS section provides the highest performance, easiest to use, and most natural De-esser ever built, as well as a one of a kind, soft knee High Frequency Limiter. You will love it!

Specifications

  • Freq. Response
    5 Hz to 140 kHz on transformerless inputs and outputs.
    Transformer Output response is 10 Hz to 110 kHz .
  • Dynamic Range
    120 dB from maximum output (.1% clipping) to minimum output. Greater than 110 dB signal to noise.
  • Distortion Ranges between .00056% and .005% depending on mode and settings. DS section has THD < .005%.
  • DC coupled Input and Outputs and one transformer coupled Output
    High quality audio caps used internally.
  • Dynamic Time Constants
    Attack is approximately .5 mS. Release .04 sec, fixed internally.

Click here for more information





Share your knowledge of this product with other customers...Be the first to write a review

Browse for more products in the same category as this item:


Recording
Recording > Signal Processors > Parametric EQs
Recording > Signal Processors