Fostex 6301NX Transformer Balanced & Unbalanced Input Active Monitor (Single)

• 20W D-class power amplifier for higher output level and less power consumption with no heat sink
• Dedicated 4-inch full range driver for clear audio reproduction
• Traditional rugged enclosure of aluminum die-cast with the physically identical height and width to the current B-series
• Flat panel design to avoid inadvertent power-off or level change
• Auto Stand-by mode (compliant to ErP directive) for energy saving
• Detachable IEC type power inlet with multi-voltage power handling
• Newly designed mounting bracket (EB-6301) for wall mounting with variable angle adjustments

• Enclosure type: closed
• Unit: 4” full range
• Frequency response: 70 Hz – 15k Hz
• Sound Pressure Level: 85dB / W (1m)
• Maximum SPL: 98dB

• All Models: Connector: 1/4” TS Phone (unbalanced)
  Input Impedance: 10k ohm or more
• 6301NX Connector: XLR-3-31 (transformer balanced)
  Input Impedance: 10k ohm or more
• 6301NE Connector: XLR-3-31 (electrically balanced)
  Input Impedance: 10k ohm or more
• 6301ND Connector: XLR-3-31 (IEC 60958 AES/EBU)
  Input Impedance: 110 ohm or more

• 6301ND Connector: XLR-3-32 (IEC 60958 AES/EBU)

• Rated utput: 20W
• Distortion (T.H.D.): 0.05% (1kHz / 1W output)
• Residual Noise: -70dBV or less (NB/NE/NX), -65dBV or less (ND)
• Input Sensitivity:
  1/4” TS phone: -14dBV (0.2Vr.m.s.)
  XLR: +4dBu (1.2Vr.m.s.)
  XLR(Digital): -12dBFS
• Auto Stand-by: active after approx. 25 min. of continuous input lower than the threshold level

• Dimensions: 120 (W) x 189 (H) x 120 (D) mm
• Weight: NB/NE/ND: 2.2kgs, NX: 2.3kgs
• Power Requirement: AC 100 – 240V (50/60Hz)
• Power Consumption: 10W (less than 0.5W in stand-by mode)