Home > Recording > Mic Preamps > Dual-Channel Mic Preamps >

Phoenix Audio DRS-2 - Dual mono Mic Pre/DI


Phoenix Audio DRS-2 Dual mono Mic Pre/DI


 
List Price: $2,449.00
PAS DEAL $2,199.00
You save $250.00!
You'll earn 2199 points
.



Availability: Usually Ships in 24 Hours

Product Code : DRS-2
QTY:

DESCRIPTION
 

Phoenix Audio is dedicated to the development of Class A discrete technology used within high build-quality equipment designed for both the professional and the home studio environment.The DRS-2 Mic-Pre/DI uses our well proven and loved Class A output stage (DSOP-2) coupled with our custom wound output transformer, but also has our latest breakthrough in transformerless Class A, Discrete Mic Input Technology which gives a “valve-like” sound. It also incorporates our high input impedance DI circuitry.The DRS-2 is the culmination of over 40 years experience designing Class A circuitry within the Audio Recording Industry.The DRS-2 was the first bespoke product to be launched by Phoenix Audio in November 1999, and has enjoyed an almost “cult” following ever since. The Class A output stage (TF1) was originally designed by David Rees, the designer of the famous Neve 2253 Limiter and 2254 Limiter/compressor (amongst many other designs), as a retrofit for Neve modules, and the TF1 has now been superseded by the DSOP2 output stage.

The Class A, discrete, truly balanced, transformerless microphone input stage was designed to out-perform any transformer input for frequency response, yet has all the characteristics expected in a high quality Class A design, while the discrete, Class A, high input-impedance DI stage delivers a clearer, stronger and more defined and open sound that captures all the nuances and subtleties of your instrument.

Specifications

  • Stereo 1U unit: With 240V/110V mains voltage input selector switch
  • Class A Output specs. See our DSOP2 Specifications!!
  • Outputs: XLR’s and TSR 1/4″ Jack on rear
  • Phoenix Audio’s unique Class A, transformerless, True balanced Mic input stage.
  • Phoenix Audio’s custom wound output transformer.
  • Microphone inputs: XLR’s on Front and Rear Panels
  • Individual Earth Lift: Push-button switches
  • Gain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the fader
  • Gain reduction: -30dB push-button Mic/Line switch (Mic input)
  • High Input Impedance DI: Mono 1/4″ Jack on front panel
  • Gain Meter: LED Metering
  • Phantom Power: Switchable 48V phantom on Push-button Switches
  • High Pass Filter: on Push-button Switch
  • Phase Reverse: on Push-button Switch
  • Frequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHz
  • Frequency Response: DI Input Stage: -0.3dB @ 40Hz, – 0.5dB @ 25kHz
  • Typical Headroom: +24dB on Mic-Pre stage
  • DI Stage gain: Maximum of 20dB
  • All units are wired with PTFE silver military grade cable




Share your knowledge of this product with other customers...Be the first to write a review

Browse for more products in the same category as this item:


Recording > Mic Preamps > Dual-Channel Mic Preamps
Recording > Mic Preamps
Recording