Home > Accessories > Audio Accessories > Direct Boxes >

Countryman Type 10S Stereo Active Direct Box Countryman Type 10 Active Direct Box Not Available


Countryman Type 10S Stereo Active Direct Box


 
-------------- Alternate Views: ---------------


List Price: $550.00
PAS DEAL $550.00
You'll earn 449 points
Mfg Model SKU DT10S
.



Availability: CURRENTLY NOT AVAILABLE

Product Code : DT10S
QTY:

DESCRIPTION
 
Countryman Type 10S Stereo Direct Box

Product Highlights

  • Active Circuit Preserves Signal Level
  • Phantom/Battery Power Test Button
  • Channel Independent Ground Lifts
  • Per Channel: 1x 1/4" & 1x RCA Inputs
  • 1x Stereo Gold-Plated 1/8" Input
  • Extruded Aluminum Housing

Countryman Type 10S Stereo Direct Box Overview

The Countryman Type 10S Stereo Direct Box can be used to connect the output of any high impedance instrument, such as a keyboard or guitar, to a balanced XLR microphone input, allowing you to send signal to a mixer or mic preamp from your high impedance instrument. It features a 1/4" and RCA input per channel, as well as a gold-plated stereo 1/8" input. The unit also has two 1/4" throughputs, allowing you to run a high impedance signal to an amplifier. The two balanced XLR outputs allow you to run your signal to any standard mic level input.

The Type 10S is designed with a flat frequency response from 10Hz to 50kHz with a linear phase response within two degrees for its range. This provides an accurate transient response, resulting in a transfer of your signal that is faithful to the source. The Type 10S features an active circuit, powered by 48 volt phantom power or an internal nine-volt battery. The active circuit allows your signal to pass through the direct box without being padded, as with passive boxes, and results in lowered noise and interference.

The unit features two channel independent ground lifts, which can reduce hum and electrical interference. The Type 10S also has a 0dB, 15dB, or 30dB selectable pad per channel, as well as a phantom and battery power test switch.

Over 105dB of cross talk rejection prevents signal mixing between the two channels
Connectors and switches are recessed into a single-piece extruded case with extra thick walls. Internal electronics are molded in epoxy to protect against electrical damage
FREQUENCY RESPONSE 10 Hz to 50 kHz (+/- 1 dB)
DEVIATION FROM LINEAR PHASE:

30 Hz: +/- 2°

100 Hz to 20 kHz: 0°

NOISE (SHORTED INPUT, BW = 22 HZ TO 20 KHZ): 1.8 uVrms (-115 dBVrms)
DISTORTION (1 VPP IN, R L= 1.2 KOHM THROUGH 200 FEET OF XLR CABLE):

THD (1 kHz): < 0.001%

THD (30 Hz to 20 kHz): < 0.005%

IMD (10 kHz/60 Hz, 4:1): < 0.002%

CROSS-TALK REJECTION: > 105 dB (20 Hz to 20 kHz)
POWER OPTIONS:

48 V Phantom (1.5 mA)

9 V Battery (4.8 mA, 130 hours on a typical alkaline)

INPUT PROTECTION: 220 Vrms and 20,000 V static discharges
TRANSFORMER ISOLATION VOLTAGE: > 500 V from instrument ground to either XLR output pin 1
PADDING SETTINGS:

0 dB

-15 dB

-30 dB

RF FILTERING:

Input: 1.5 MHz low-pass filter

Output: 60 kHz low-pass filter

MAXIMUM INPUT LEVEL (1% THD):

0 dB pad: 5 Vpp

-15 dB pad: 28 Vpp

-30 dB pad: 158 Vpp

INPUT RESISTANCE:

0 dB pad: 10 MOhm

-15, -30 dB pad: 10 kOhm

RCA and 1/8" inputs: 20 kOhm

INPUT CAPACITANCE: 240 pF (equal to 3 ft of low-capacitance guitar cable)
OUTPUT POLARITY: Pin 2 positive
DIMENSIONS: 6.25" x 4" x 2" (159 mm x 102 mm x 51 mm)
WEIGHT: 31.2 oz (0.88 kg)




Share your knowledge of this product with other customers...Be the first to write a review

Browse for more products in the same category as this item:


Accessories > Audio Accessories > Direct Boxes
Microphones > Countryman Microphones > Countryman DI Boxes
Accessories > Audio Accessories
Microphones > Countryman Microphones
Accessories
Microphones