Home > Pro Video >

Kramer PT-572+ HDMI over Twisted Pair Receiver

Kramer PT-572+ HDMI over Twisted Pair Receiver

-------------- Alternate Views: ---------------

List Price: $195.00
Product Price: $156.00
You save $39.00!
You'll earn 156 points
Mfg Model SKU PT572+
UPC Code 7291063000141

Availability: Usually Ships in 1 to 2 Business Days

Product Code : PT-572PLUS


Kramer PT-572+ - HDMI over Twisted Pair Receiver Over 1 STP Cable

The Pt-572+ is a twisted pair receiver for HDMI signals. The PT-571 converts an HDMI signal to a single twisted pair signal and the PT-572+ converts the twited pair signal back to an HDMI signal.


  • Max. Data Rate - 1.65Gbps
  • HDTV compatible
  • HDCP compliant
  • HDMI Support - HDMI (V.1.4 with 3D, Deep COlor, x.v.Color, HDMIumcompressed audio channels, Dolby True HD, DTS-HD)
  • 3D pass-through
  • DGKat Signal Integration - Kramer's unique technology for converting TMDSas well as control and communications to signals that run over twisted paircables.
  • System Range - Up to 90m (295ft) at 1080i,or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft)at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat723cable.
  • Cable - Requires Shielded Twisted Pair (STP) cable. Foroptimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 andBC-DGKat723 cables. Note that the transmission range depends on the signalresolution, graphics card and display used. The distance using non-Kramer CAT5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered toground.
  • EDIDPassThru - Passes EDID/HDCP signals from source to display
  • PowerConnect System - A single connection to the transmitter or the receiver powersthe system when the devices are without 270ft of each other.


  • Inputs: 1RJ-45 connector
  • Outputs: 1HDMI connector
  • Bandwidth:Supports up to 1.65Gbps bandwidth per graphic channel
  • Complaincewith HDMI standard: Supports HDMI and HDCP
  • PowerSource: 12V DC, 250mA
  • Dimensions:2.4 x 2.1 x 1 inches

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Pro Video
Pro Video > Video Extenders / Repeaters