 |
 |
 |
|
Product Highlights
Control Server
- A web services platform for AV control.
- Programmed using Composer software.
- Built-in wireless and wired connectivity.
- Browser-based administration and control.
- Serves BYOD computers, tablets, and phones.
- WI-FI access makes for a secure “AV control island”.
Network-based AV Management.
Control Server is a flexible and extensible approach to the control of Symetrix
Composer-enabled DSPs and select third-party AV components. The centralized
server-based technology enables comprehensive design, deployment, and
maintenance of large and sophisticated systems employing numerous control
endpoints supporting multiple simultaneous users.
Wired and
wireless network interfaces. Control Server’s wired
Gigabit Ethernet port enables control via dedicated AV or general purpose
facility networks, as well as direct communication with networked DSP hardware.
Operating in wireless mode, Control Server functions as an access point providing
mobile device connectivity – in essence providing a secure “AV control island”.
Straight-forward
Setup and Deployment. Control Server is designed
into a system using Composer – Symetrix’ award winning open-architecture
application. Composer is used to locate and program Control Server and other
Symetrix DSPs and accessories. Control Server’s browser-based administration is
then used to manage app licenses, users, and user access.
SymVue for
Control Server. Award winning SymVue running on Control Server hardware
makes possible robust deployment and maintenance of large scale systems by
supporting numerous and diverse browser-based endpoints under the control of
multiple simultaneous users. Learn more about SymVue
System
|
|
|
Processor
|
Intel® 64 Architecture Chipset.
|
|
Ethernet Cable
|
Standard CAT5e or CAT6, maximum
device-to-device length = 100 meters.
|
|
Maximum Devices Per System
|
80 units per Site File.
|
|
Maximum Stored Presets
|
1000.
|
Mechanical Specifications
|
|
|
Space Required
|
Half rack unit (WDH: 20.83 cm x
22.86 cm x 4.37 cm / 8.2 in. x 9 in. x 1.72 in.) Depth does not include
antenna or connector allowance. Allow at least 3 inches additional clearance
for front and rear panel connections. Additional depth may be required depending
upon your specific wiring and connections.
|
|
Electrical
|
12 VDC @ 2.5 A, 30 Watts
Maximum. Symetrix part number 12-0036, CUI part number SMI36-12-V-P6.
|
|
Ventilation
|
Maximum recommended ambient
operating temperature is 30 C / 86 F. Ensure that the left and right
equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The
ventilation should not be impeded by covering the ventilation openings with
items such as newspapers, tablecloths, curtains, etc.
|
|
Certifications or Compliance
|
SAFETY: UL/CSA/EN 60065. EMC:
FCC 15.107, FCC 15.109, ICES-003, EN 300 328 V2.1.1, EN 301 489-17 v3.1.1, EN
301 893 V2.1.1, EN 55103-2, EN 55032, EN 61000-4-5, EN 61000-3-2.
ENVIRONMENTAL: RoHS. FCC: Part 15 Subpart C, Subpart E (UNII-1/2/2Ext/3). ID:
N6C-SXPCEAN2. JAPAN RADIO LAW (MIC): Rule Article 2 Section 1 Number 19, Rule
Article 2 Section 1 Number 19-3, Rule Article 2 Section 1,Number 19-3-2.
Certification Number: 007-AC0271.
|
|
Shipping Weight
|
5.2 lbs. (2.4 kg).
|
Peripheral Connectivity
|
|
|
Ethernet
|
Integrated Intel® 10/100/1000
Network Connection.
|
|
Wi-Fi
|
IEEE 802.11a/b/g/n.
|
|
USB
|
Two Hi-Speed USB 2.0 ports.
|
Wi-Fi
|
|
|
Chipset
|
Atheros XSPAN family with
SST3™, with increased link rate by 100% at short range, 50% at mid-range and
25% at long range.
|
|
Type
|
IEEE 802.11n compliant and
backward compatible with 802.11a/b/g.
|
|
Frequency
|
Simultaneous dual-band 2.4 GHz
and 5 GHz with Dynamic Frequency Selection (DFS). IEEE 802.11 b/g/n:
2.412-2.462 GHz. IEEE 802.11a/n: 5.18-5.24 + 5.745-5.825 GHz (US) 5.18-5.24
GHz (Europe ETSI).
|
|
Data Transfer Rates
|
Up to 300 Mbps.
|
|
Radio Data Rates
|
Auto rate sensing.
|
|
Enhancements
|
Dual-band 2x2 spatial
multiplexing, cyclic-delay diversity (CDD), low-density parity check (LDPC),
maximum ratio combining (MRC), space time block code (STBC) and Tx
beamforming (TxBF).
|
|
Antennae
|
Two RP-SMA (reverse-polarity
SMA) auto switching omni-directional antennae providing 1.5 dBi nominal gain
at 2.4 GHz and 2.1 dBi nominal at 5 GHz.
|
|
International
|
Multi-Country Roaming Supported
(IEEE 802.1d Global Harmonization Standard).
|
|
Modulation
|
OFDM: BPSK, QPSK, 16-QAM,
64-QAM; DSSS; DBPSK, DQPSK, CCK.
|
|
Security
|
40-bit (also called 64-bit) and
128-bit WEP, WPA-PSK, WPA2-PSK, and WPA/WPA2 Enterprise, IEEE 802.11i
encryption.
|
|
Number of Simultaneous
Connections
|
50.
|
Architect and Engineer Specifications: Control Server.
The front panel
shall include a bi-color LED and momentary switch used for network
identification, power-on, and other documented features or control.
The unit shall
provide user connections for the included power supply and a standard
10/100/1000 Base-T RJ45 network connection utilizing CAT5e/6 cable. A standard
802.11 a/b/g/n Wi-Fi interface may be enabled for built-in wireless control of
the AV network or bridging control access from an existing network.
The unit shall host
apps which provide specialized web-based user control interfaces and enhanced
functionality for Symetrix DSP systems. These interfaces may be accessed by
multiple network devices running compatible web browsers. Compatible web browsers
for the user interface shall be:
Windows: Internet
Explorer 10+, Microsoft Edge, Chrome, and Firefox.
macOS: Safari, Chrome, and Firefox.
iOS: Safari.
Android: Android Web Browser.
All program memory
shall be non-volatile and provide program security should power fail. The
device shall provide an on board real time clock to facilitate automatic, timed
changing of presets and may sync to NTP.
A designer software
application shall be provided that operates on a Windows computer, with network
interface installed, running Windows® 7 or higher operating system. The
application shall discover units on the network and program its control
interfaces. A built-in web-based administration interface shall provide the
means to install new, update existing, and license apps as well as define users
and configure various system settings.
The device shall
have a power plug that accepts power from Symetrix part number 12-0036, CUI
power supply part number SMI36-12-V-P6. The device shall meet UL/CSA and CE
safety requirements and comply with CE and FCC Part 15 emissions limits. The
device shall be RoHS compliant. The chassis shall be constructed of cold rolled
Galvalume®, and may be surface mounted or mount into a standard 19” 1U EIA rack
using an available bracket or rack tray. The device shall be a Symetrix
Control Server.
|
|
|
 |
|
 |
|
800-834-5986
