Home > Recording > Headphones and Cue Systems > Headphone Amps and Cue Systems >

Hear Technologies PRO Digital Overlay Installation Upgrade for Hear Back PRO (4-Pack)

Hear Technologies PRO Digital Overlay Installation Upgrade for Hear Back PRO (4-Pack)


 
List Price: $1,600.00
Product Price: $1,305.00
You save $295.00!
You'll earn 2100 points
Mfg Model SKU PRODO4U



Availability: YES, in stock

Product Code : PRODO4U
QTY:

DESCRIPTION
 
Made in the USA, by an American!
Support American made products
Our future depends on it!!!

Hear Technologies PRO Digital Overlay Installation Upgrade for Hear Back PRO (4-Pack)


Product Highlights
For Touring, Live Sound, and Studio Use
  • Four Preinstalled Mixer Overlays
  • Label Channels and Mixers
  • Quick Identification in Low-Light
  • Bright and Easily Legible OLED Screens
  • Use Letters, Numbers, and Symbols
  • Remote Naming via Computer or iOS App
  • Less than 3mm Thick
  • Rugged Design Installs over Mixer Face
  • Ribbon Connector to Mixer Expansion Port

Hear Technologies PRODO4U Overview

Upgrade your Hear Back PRO monitor mixers to OLED screens and electronic labeling with this PRO Digital Overlay Installation Upgrade for Hear Back PRO Four Pack from Hear Technologies. While you can order the four included overlays individually or separately and install them yourself, this convenient factory installation option allows you to get the Hear Back PRO Four Pack system with the overlays already preinstalled.

Less than 3mm thick, the overlay installs right over the mixer face and connects to the mixer's expansion port via ribbon cable, providing neat labeling of the channels and mixer functions. The overlay's bright OLED screens are easy to see in the studio or during live performances. Naming functions are done remotely using the iOS app or a computer.

Preinstalled Digital Overlay Upgrades
  • Bright and easily legible OLED screens allow for quick identification and control, even in low-light environments
  • Supports the use of letters, numbers, and symbols when labeling channels and mixers
  • Mixers and channels can be named and updated remotely with either the Hear Back PRO iOS app or via a computer
  • Unobtrusive with a thin ultralow profile (less than 3mm thickness)
  • Rugged design for stage and touring
  • Installed at factory
Features

Octo HB4 System Features:

  • Virtually unlimited system size
  • Affordable solution
  • Excellent audio fidelity
  • Very long digital cables possible without loss of audio quality
  • Audio inputs ADAT, analog, and the HearBus are switch selectable from the front panel
  • Local control of up to 10 channels of audio (eight inputs plus a stereo AUX input); master Volume controls the level of headphones, line outs, and AUX input
  • Headphone amplifier fault indicator: In case of overheating or a short, the red LED illuminates to alert the user of a problem
  • Bus Status Indicator: Confirms proper connection to the Hub
  • Link Indicators: Whenever two pairs of mono inputs are linked for stereo operation, the link LED is illuminated
  • Standard CAT5e power and signal connection - a cost effective, simple, unobtrusive way to connect eight channels of audio. The cable is held in place with a built-in cable strain relief
  • Balanced line-outs, mono/stereo
  • Stereo AUX In
  • Mixer has a built-in mic stand mount for attaching to a standard mic stand or clipping onto a stand extension bar or clip
  • High power - low distortion headphone amplifiers

Mixer Features:

The Hear Back Mixer is equipped to mount to any standard mic or desk stand using the built-in 5/8" threaded socket located on the back of the mixer.

  • Local control up to 10 channels of audio
  • Master volume
  • Built-in standard mic stand mount
  • 24-bit D/A converters
  • Bus status indicator
  • Headphone amplifier fault indicator
  • Mono/stereo link indicators
  • Balanced line outs, mono/stereo
  • Stereo AUX in: Expand numbers of mixers; drum module/metronome input

Hub Features:

A single Hub supplies signal and power to a maximum of eight Mixers. To expand your system, the Hubs can be daisy-chained using the HearBus In/Out for virtually unlimited system size. The Hub accepts analog input signals from an audio mixer such as auxiliaries, matrix outs, sub outs, monitor outs, and/or direct outputs. The ADAT input can come from digital audio workstations, digital recorders, or digital mixers.

  • Three switch selectable input sources: ADAT Optical, analog, HearBus
  • 24-bit A/D converters
  • 44.1 kHz and 48 kHz sample rates
  • Multi-color, four-level metering
  • Daisy-chain for expanded systems
  • Internal universal input power supply
  • 1 RU chassis

Related Products
Hear Technologies Hear Back OCTO Mixer 8-Channel Personal Monitor Mixer for Hear Back OCTO Hub
Product Price: $404.00

Add
Hear Technologies Hear Back OCTOHBM Mixer 8-Channel Personal Monitor Mixer for Hear Back OCTO Hub




Share your knowledge of this product with other customers...Be the first to write a review

Browse for more products in the same category as this item:

Recording > Headphones and Cue Systems > Headphone Amps and Cue Systems
Live Sound > Headphones & Personal Monitoring > Headphone Amp & Cue Systems
Live Sound > Headphones & Personal Monitoring
Live Sound Made in the USA > Personal Monitoring Made in the USA
Live Sound
Recording > Headphones and Cue Systems
Live Sound Made in the USA
Recording